-60 ~ 250℃ Refrigeration and Heating Circulating Thermostat

-60~250℃ refrigeration and heating circulation thermostat is a high-performance temperature control device that can meet the needs of precise temperature control in a wide temperature range in laboratories and industries.

The characteristics and advantages of refrigeration and heating circulation thermostats are as follows:

Wide temperature range coverage: It can accurately control in a wide temperature range of -60℃ to 250℃, adapting to various experimental conditions from low temperature freezing to high temperature heating.

Rapid temperature change: It has the ability to quickly heat up and cool down, reducing experimental preparation time and improving experimental efficiency.

High-precision temperature control: Using advanced PID temperature control algorithm, the temperature control accuracy can usually reach ±0.1℃ or better, ensuring the repeatability and accuracy of experimental results.

Circulation system: The internal circulation pump drives the heat transfer medium to circulate inside and outside the system, realizing efficient heat exchange with the reaction vessel (such as reactor, thermostatic bath) while maintaining the purity of the medium.

Intelligent operation interface: Most devices are equipped with touch screen control, support preset programs, and can realize programmable control of temperature curves, which is convenient for complex experimental process management.

Safety protection: Multiple safety protection measures such as over-temperature, over-current, and abnormal pressure are built in to ensure safe use.

This type of thermostat is widely used in chemical synthesis, biopharmaceuticals, materials science, petroleum and petrochemicals, quality inspection, and teaching research. For example, they can be seen in polymerization reactions, drug stability tests, and material aging tests.

If you are looking for a -60~250℃ refrigeration and heating cycle thermostat suitable for your specific application, it is recommended to pay attention to the following purchase points:

1. Temperature range and accuracy: Confirm whether the exact temperature range and control accuracy required meet the equipment specifications.

2. Heating and cooling rate: According to experimental requirements, choose equipment that can meet the requirements of rapid temperature changes.

3. Cooling medium: Understand the type of cooling medium used by the equipment to ensure that it is compatible with your experiment.

4. Control interface and programmability: Choose equipment that is easy to operate and supports program settings according to usage habits.

5. After-sales service: Consider the supplier’s after-sales service and technical support capabilities.

If you need a recommendation for a specific brand or model, or want to get the latest product information on the market, I can find relevant information or supplier contact information for you. Please tell me your specific needs.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: lilia@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

1.Cooling and Heating Systems

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

• Temperature range: -120℃ ~ +350℃
• High-precision, intelligent temperature control
• Cooling capacity: 0.5kW ~ 1200kW
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Circulators

(Custom Designs)

• Temperature range: -45℃ ~ +250℃
• Emerson Copeland compressor, reliable quality
• Self-diagnosis function, multiple safety protection devices
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Systems (WTD series)

(Custom Designs)

• （Micro channel / tube reactors specialized）
• Temperature range: -70℃ ~ +300℃
• High-performance circulation pump, more stable temperature control effect
• Wide temperature range to meet the needs of more industries
• Each device is load tested for more than 12 hours

TCU Multi-reactors Temperature Control System

(Custom Designs)

• Temperature range: -120℃ ~ +250℃
• Sealed, repeatable temperature control
• Built-in electric heating thermal oil auxiliary system
• Add cold and heat source heat exchange modules according to needs
• Each device is load tested for more than 12 hours

2.Cooling Chillers

Low Temperature/Cryogenic Chillers (Water Cooled)

(Custom Designs)

• Temperature range: -150℃ ~ -5℃
• International brand compressor, high cooling efficiency
• Secondary subcooling technology, fast cooling speed
• Automated control and operation, efficient and energy-saving
• Each device is load tested for more than 12 hours

Six product series

Recirculating Chiller/Refrigerated Circulator (Air Cooled)

(Custom Designs)

• Temperature range: -120℃ ~ +30℃
• International brand compressor, cascade refrigeration technology
• Use ethylene glycol or a mixture of ethylene glycol and water
• Fully sealed design to ensure the purity of the medium
• Each device is load tested for more than 12 hours

Five product series

Small Chillers / Mini Chillers

(Custom Designs)

• Temperature range: -18℃ ~ +35℃
• International brand compressor, stable performance
• Microcomputer controller, adjustment unit 0.1℃
• Energy saving, high temperature control accuracy
• Each device is load tested for more than 12 hours

Two product series

High Temperature Chillers

(Custom Designs)

• Temperature range: -100℃ ~ +80℃
• International brand compressors and other accessories
• Fully sealed design to ensure the purity of the medium
• PLC programmable controller
• Each device is load tested for more than 12 hours

Five product series