Laboratory Cooling and Heating Systems for Reactors
Laboratory heating and cooling systems are very common in fields such as chemistry, pharmaceuticals, and materials science, especially in reactor experiments that require precise temperature control. Such systems can provide fast and accurate temperature changes to meet a variety of experimental needs.
Below are some common laboratory heating and cooling systems and their characteristics
1. Circulating cooling/heating bath:
•Purpose: Control the temperature in the reactor by circulating liquid (such as water, ethylene glycol solution).
•Type: Single-stage or two-stage compressor cooling, resistance wire or electric heating rod heating.
•Features:
Wide temperature range (-40°C to +200°C).
Precise temperature control (±0.1°C).
Programmable temperature curve.
Built-in safety protection functions (such as over-temperature protection, low pressure protection, etc.).
2. Jacketed reactor supporting system:
•Purpose: Used in conjunction with jacketed reactors to heat or cool through the medium in the jacket.
•Features:
Wide temperature range (-80°C to +300°C).
High-precision temperature control.
Supports a variety of media (such as water, ethylene glycol, silicone oil, etc.).
Can achieve rapid heating and cooling.
Suitable for small-scale and pilot-scale experiments.
3. Multifunctional environmental test chamber:
• Purpose: Simulate various environmental conditions, including high temperature, low temperature, humidity changes, etc., widely used in product testing in electronics, automotive, aerospace and other industries.
• Features:
Wide temperature range (-70°C to +180°C).
Humidity control function.
Powerful programming function, can set complex temperature and humidity curves.
Suitable for a variety of sample tests.
4. Peltier effect device:
• Purpose: Use the Peltier effect for rapid heating and cooling, suitable for small reactors or microfluidic devices.
• Features:
Fast response time.
No noise, no vibration.
Compact design, suitable for desktop use.
Suitable for small experiments that require frequent temperature switching.
Key points for selecting laboratory heating and cooling systems
• Temperature range: Determine the minimum and maximum operating temperatures required based on your specific needs.
• Temperature control accuracy: Consider the temperature control requirements of the experiment and select the appropriate accuracy level.
• Capacity and flow: Select the appropriate equipment capacity and fluid flow based on actual needs.
• Safety: Ensure that the equipment has the necessary safety protection measures to prevent accidents.
• Maintenance and care: Select equipment that is easy to maintain and maintain to reduce long-term operating costs.
• Control system: Select equipment with an intelligent control system for easy setup and monitoring.
Application areas of laboratory heating and cooling systems
• Chemical synthesis: organic synthesis, catalytic reactions, etc.
• Pharmaceutical research and development: drug synthesis, extraction, purification, etc.
• Materials science: research and development and testing of new materials.
• Biotechnology: enzyme activity research, protein crystallization, etc.
If you have a specific budget range, application scenario or special requirements, please provide more details and I will provide you with more specific suggestions and recommendations. This will help you better choose a heating and cooling system that suits your laboratory needs.
We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.
We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.
Email: lilia@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
Cooling and Heating Systems (SUNDI series)
- Temperature range: -120℃ ~ +350℃
- High-precision, intelligent temperature control
- Cooling capacity: 0.5kW ~ 1200kW
- Fully closed system to extend the service life of thermal fluid
- Each device is load tested for more than 12 hours
Temperature range | -10 ~ +150°C series | -25 ~ +200°C series | -25 ~ +300°C series | -45 ~ +250°C series | -45 ~ +300°C series | -60 ~ +250°C series | -60 ~ +300°C series | -70 ~ +250°C series | -80 ~ +250°C series | -90 ~ +250°C series | -100 ~ +100°C series | ||
Cooling Capacity | 1.5 ~ 15kW | 1 ~ 200kW | 1 ~ 200kW | 0.45 ~ 200kW | 0.9 ~ 25kW | 0.25 ~ 60kW | 0.75 ~ 25kW | 0.4 ~ 15kW | 0.3 ~ 80kW | 0.2 ~ 80kW | 0.45 ~ 80kW | ||
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized |
Cooling and Heating Circulators
- Temperature range: -45℃ ~ +250℃
- Emerson Copeland compressor, reliable quality
- Self-diagnosis function, multiple safety protection devices
- Fully closed system to extend the service life of thermal fluid
- Each device is load tested for more than 12 hours
Temperature range | -25°C ~ +200°C series | -45°C ~ +250°C series | |||||||
Cooling Capacity | 1 ~ 15kW | 0.25 ~ 15kW | |||||||
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized |
Cooling and Heating Systems (WTD series)
- (Micro channel / tube reactors specialized)
- Temperature range: -70℃ ~ +300℃
- High-performance circulation pump, more stable temperature control effect
- Wide temperature range to meet the needs of more industries
- Each device is load tested for more than 12 hours
Temperature range | -70°C ~ +300°C | -45°C ~ +250°C | -70°C ~ +200°C | ||||||
Cooling Capacity | 1.1 ~ 7.5kW | 1.5 ~ 5.5kW | 11 ~ 50kW | ||||||
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized |
TCU Multi-reactors Temperature Control System
- Temperature range: -120℃ ~ +250℃
- Sealed, repeatable temperature control
- Built-in electric heating thermal oil auxiliary system
- Add cold and heat source heat exchange modules according to needs
- Each device is load tested for more than 12 hours
Temperature range | -45°C ~ +250°C series | -120°C ~ +250°C series | Customized Temperature Control System | RT+10°C ~ +135°C | |||||
Heating Capacity | 25 ~ 80kW | 25 ~ 80kW | Custom | 25 ~ 300kW | |||||
Note: Any temperature range from -150℃ ~ +350℃ and any cooling capacity can be customized |