Causes of Corrosion in Industrial Chillers

Causes of Corrosion in Industrial Chillers

Industrial chillers can be seen in all walks of life. While providing good cooling effects, they will also bring certain troubles to users, such as corrosion problems. There are many reasons for equipment corrosion. Only by mastering its corrosion Reasons, we can better maintain and use.

The common causes of industrial chiller corrosion are as follows:

1. The manufacturer has unreasonable product design and installation plan, which makes the equipment prone to corrosion.

2. FRP cooling tower water replenishment and moisturizing pipes and refrigerated water replenishment and moisturizing pipes forgot to install smart water meters. In many cases, chemicals are used in water treatment, and it is often necessary to inject chemicals depending on the water volume of the system and the amount of water replenishment. The design of the water meter does not take this aspect into consideration.

3. The installed filter is Y-shaped. This filter is installed on the standpipe and can only collect the garbage generated during the early operation of the equipment. However, after the equipment has been in operation for a long time, this Y-shaped filter will Cannot capture fine microorganisms, impurities and rust. After a long time, a large amount of sand, impurities, and rust have accumulated on the condenser, causing equipment corrosion.

4. Many industrial chillers are not equipped with fast drain valves, which leads to the failure to discharge the sewage in the refrigeration system in time, causing equipment corrosion.

The mechanism of industrial chillers is relatively complicated, and professional personnel are required to operate and use them. If they do not pay attention to correct operation and maintenance during use, they are prone to frequent failures, which will affect the smooth development of enterprise production!