Chemical Distillation Kettle Heating System

The distillation kettle is an indispensable equipment for distillation in chemical production. The principle of the distillation kettle is to vaporize the unnecessary fractions through heating based on the different boiling points of the fractions, and then collect them through a condensation device to complete the process.

Common heating methods include steam heating and flue gas heating. If the required heating temperature is high, the former two heating methods are not feasible. The custom-made jacketed oil heater for chemical distillation kettle uses indirect heating, and the temperature can rise to 300℃.

The principle of the customized jacketed oil heater is that the oil outlet of the oil tank is connected to a pump through a pipeline and a ball valve, and the pump is connected to a heater through the pipeline. It also includes a thermostat and a heater that are connected in sequence to the heater through the pipeline. The exchanger and the gas collecting tank are connected to the oil tank through pipelines and solenoid valves arranged on the pipelines. The pipeline at the outlet of the gas collecting tank is connected to the pipelines at the oil tank outlet and the pump inlet to form a three-way pipeline.

By setting the thermostat to set the temperature, the gas tank, the pump and the heater form a loop control of the oil, which can achieve efficient heating and precise temperature control of the oil temperature, and higher efficiency can be obtained through the exhaust of the gas tank and circulating heating. oil temperature, suitable for occasions with higher heating temperature requirements.

Cascade control can also be used to directly control the material temperature in the kettle to meet higher process requirements. Customized jacketed oil heaters have built-in safety protections, such as high temperature power outage, low pressure no heating, lack of media alarm, temperature abnormality display, and high temperature automatic discharge. Gas and other functions improve the stability and safety of thermal oil during the heating process.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: lilia@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

• Temperature range: -120℃ ~ +350℃
• High-precision, intelligent temperature control
• Cooling capacity: 0.5kW ~ 1200kW
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Systems (WTD series)

(Custom Designs)

• （Micro channel / tube reactors specialized）
• Temperature range: -70℃ ~ +300℃
• High-performance circulation pump, more stable temperature control effect
• Wide temperature range to meet the needs of more industries
• Each device is load tested for more than 12 hours

Cooling and Heating Circulators

(Custom Designs)

• Temperature range: -45℃ ~ +250℃
• Emerson Copeland compressor, reliable quality
• Self-diagnosis function, multiple safety protection devices
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Heating Circulators

(Custom Designs)

• Temperature range: +50℃ ~ +300℃
• Large heat exchange area and fast heating speed
• Self-diagnosis function, multiple safety protection devices
• Closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TES Series (Temperature control for fuel and oil testing)

(Custom Designs)

• Temperature range: -85℃ ~ +250℃
• Siemens PLC controller and other brand accessories
• Self-diagnosis function, multiple safety protection devices
• Fully closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TCU Multi-reactors Temperature Control System

(Custom Designs)

• Temperature range: -120℃ ~ +250℃
• Sealed, repeatable temperature control
• Built-in electric heating thermal oil auxiliary system
• Add cold and heat source heat exchange modules according to needs
• Each device is load tested for more than 12 hours

Cooling Chillers                                                                                                     

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Mini Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.