Heater and Cooler in one

Heater and Cooler in one

Heater and cooler in one is a kind of mechanical refrigeration and heating equipment widely used in scientific research, biology, physics, medicine, chemical industry and other fields. Our refrigeration constant temperature heating and cooling cycle system has many series (SUNDI, HRT, KRY, TES, etc. ), the temperature range, temperature control accuracy, weight, size and other parameters of different series and models are different.

First, heater and cooler in one introduction:

The heater and cooler in one is composed of compressor, condenser, expansion valve, heat exchanger, temperature controller, circulation pump, pre-cooling unit, heating unit, refrigeration unit and other accessories. Each component has its own function and advantages. When the space is relatively small, the operating power of the equipment can be appropriately reduced, and the appropriate operating power of the constant temperature cooling and heating cycle system group can be selected to reduce the probability of equipment failure and help extend the service life of the equipment. .

The working principle of heater and cooler in one is that the pump drives the heat transfer medium (usually water or oil) from the water tank with built-in heater and cooler to the reactor, and then returns from the reactor to the water tank. The controller adjusts the temperature of the thermal fluid and the temperature of the reactor according to the temperature of the thermal fluid measured by the temperature sensor, or/and the internal temperature of the reactor.

Second, heater and cooler in one selection knowledge:

1. Heater and cooler in one also has some special models, such as isolated explosion-proof models, etc., each with different characteristics, you can choose a specific model according to your own needs. Of course, you can also choose or customize a model to meet your own requirements. Choosing a suitable constant temperature cooling and heating cycle system can not only be put into use quickly, but also cause no waste.

2. Heater and cooler in one have different temperature ranges, different models, and different heat transfer media.

3. Both heater and cooler in one adopt PID control technology. When choosing a constant temperature cooling and heating circulation system, heating power, medium circulation pressure and flow should also be considered. Different raw materials have different processing characteristics.

4. Heater and cooler in one is composed of refrigeration cycle system, heating cycle system and automatic control system. For areas with explosion-proof requirements for equipment, positive pressure explosion-proof boxes can be customized, which not only meet explosion-proof requirements, but also reduce the use of explosion-proof components and reduce the production cost of the whole machine.

5. The realization of heater and cooler in one includes a constant temperature cooling and heating cycle system based on the temperature of the thermal fluid, a constant temperature cooling and heating cycle system based on the reactor temperature, and a combined constant temperature cooling and heating cycle system. According to the actual situation, the user should investigate the operation of the heater and cooler in one, and choose a product that can meet the temperature control accuracy requirements.

Maßgeschneiderte Lösungen für Ihr Unternehmen

Kühl- und Heizsysteme (Serie SUNDI)

Temperaturregelbereich: -120°C bis +350°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Automobilindustrie, Halbleiter- und Elektrotests, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Kühl- und Heizsysteme (WTD-Serie)

（Mikrokanal / Röhrenreaktoren spezialisiert）

Temperaturregelbereich: -70°C bis +300°C

Spezielles Design für Mikrokanäle (geringe Flüssigkeitsspeicherkapazität, starke Wärmeaustauschkapazität, Zirkulationssystem mit hohem Druckabfall)

Kühl- und Heizsysteme (TES-Serie)

Temperaturregelbereich: -85°C ~ +250°C

Temperaturregelungsgenauigkeit: ± 0,3°C

Kühl- und Heizmaschinen (LTS-Serie)

Temperaturregelbereich: -80°C bis +80°C

Es wird häufig in der Halbleiterindustrie eingesetzt, um die Temperatur der Reaktionskammer, der Heizplatte und des nicht brennbaren Wärmeträgers zu regeln.

Umwälzpumpen für Kühlung und Heizung

Temperaturregelbereich: -45°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Heizungsumwälzpumpen

Temperaturregelbereich: +50°C bis +300°C

Hinweis: Die UC-Serie kann die Temperatur des Wärmeträgermediums regeln. Die UST-Serie kann nicht nur die Temperatur des Wärmeträgermediums, sondern auch die Temperatur des Reaktionsmaterials regeln.

TCU Multireaktoren Temperaturkontrollsystem

Temperaturregelbereich: -120°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.