Heater and Cooling System

Heater and Cooling System

The heater and cooling system is a cooling and heating temperature control system produced by our company. It is suitable for heating and exothermic process control during the reaction process. It can linearly control the temperature of the material in the kettle. The program control mode can be selected, and the temperature difference between the heat transfer medium and the material can also be adjusted. It can be set, the whole system adopts a fully closed cycle, no oil mist will be generated at high temperature, and no moisture will be absorbed at low temperature. There is an expansion tank in the system, and the heat transfer medium expands with heat and contracts with cold during the cooling and heating process.

1. Application introduction of heater and cooling system:

Biomedicine: laboratory-level pilot test, supporting constant temperature control of cold and heat sources such as glass reactors and fermentation tanks.

Petrochemical industry: supporting constant temperature control of cold and heat sources such as stainless steel kettles and enamel kettles, and chemical synthesis.

Aerospace: Simulation of environmental conditions, research and development of aerospace propellants and special polymer materials.

Semiconductor: semiconductor and optoelectronic industry equipment cooling and heating, component testing and temperature control.

Automobile: battery discharge test, gearbox performance test and material aging test at low temperature and high temperature.

University laboratories: constant temperature control of reaction processes such as synthesis and separation.

2. Application introduction of heater and cooling system:

Biomedicine: Supporting small rotary evaporators, glass reactors and other separation and extraction experiments, condensation and chemical synthesis, etc.

Material petroleum: supporting viscometer, rheometer, X-ray diffraction spectrum and other liquid viscosity measurement, constant temperature and material structure detection, etc.

Microorganisms: supporting fermentation tanks and other winemaking, enzyme engineering and environmental constant temperature, etc.

Food: Supporting Soxhlet extraction, Kjeldahl nitrogen analyzer and other fat extraction, condensation, wine making, research and development determination, etc.

University laboratories: Calibration of thermometers, constant temperature heating or cooling of test tubes, flasks, and beakers, etc.

3. Introduction of application of glass reactor for heater and cooling system:

Biomedicine: chemical synthesis, used for reflux, distillation, concentration, crystallization, extraction, etc., can be used with a constant temperature circulator.

Petrochemical industry: solvent recovery, used for single-component distillation, multi-component fractionation, rectification purification or chemical synthesis, etc.

Energy: fuel cells, catalytic reactions, filtration and washing, etc.

Cosmetics: material dispersion, emulsification, homogenization, mixing, extraction, etc.

University laboratories: heating/cooling of reaction materials, laboratory synthesis, catalysis or chemical reactions under other inert gas conditions, etc.

4. Application introduction of rotary evaporator for heater and cooling system:

Biomedicine: Separation and purification of drug materials and liquids, concentration and drying, etc., can be used with circulating coolers and vacuum pumps.

Petrochemical industry: solvent recycling, vacuum distillation of high boiling point substances, etc.

Cosmetics: essential oil extraction, low temperature separation, emulsification under reduced pressure, etc.

University laboratories: separation of commonly used solvents, concentration and drying of composites, distillation of water, etc.

5. Application introduction of heater and cooling system:

Biomedicine: Supporting small rotary evaporators, small glass reactors and other separation and extraction experiments, condensation, etc.

Food: Supporting Soxhlet extraction, Kjeldahl nitrogen analyzer and other fat extraction, condensation, etc.

University laboratories: instead of cooling water, reflux, distillation, rectification and other condensation in rotary evaporators and flask reaction devices.

The heater and cooling system can be used in medicine, chemical industry, food, biology, petroleum, light industry, metallurgy, energy, semiconductor, aerospace, automobile, instrumentation and other industries.

Maßgeschneiderte Lösungen für Ihr Unternehmen

Kühl- und Heizsysteme (Serie SUNDI)

Temperaturregelbereich: -120°C bis +350°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Automobilindustrie, Halbleiter- und Elektrotests, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Kühl- und Heizsysteme (WTD-Serie)

（Mikrokanal / Röhrenreaktoren spezialisiert）

Temperaturregelbereich: -70°C bis +300°C

Spezielles Design für Mikrokanäle (geringe Flüssigkeitsspeicherkapazität, starke Wärmeaustauschkapazität, Zirkulationssystem mit hohem Druckabfall)

Kühl- und Heizsysteme (TES-Serie)

Temperaturregelbereich: -85°C ~ +250°C

Temperaturregelungsgenauigkeit: ± 0,3°C

Kühl- und Heizmaschinen (LTS-Serie)

Temperaturregelbereich: -80°C bis +80°C

Es wird häufig in der Halbleiterindustrie eingesetzt, um die Temperatur der Reaktionskammer, der Heizplatte und des nicht brennbaren Wärmeträgers zu regeln.

Umwälzpumpen für Kühlung und Heizung

Temperaturregelbereich: -45°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.

Heizungsumwälzpumpen

Temperaturregelbereich: +50°C bis +300°C

Hinweis: Die UC-Serie kann die Temperatur des Wärmeträgermediums regeln. Die UST-Serie kann nicht nur die Temperatur des Wärmeträgermediums, sondern auch die Temperatur des Reaktionsmaterials regeln.

TCU Multireaktoren Temperaturkontrollsystem

Temperaturregelbereich: -120°C bis +250°C

Anwendung: Verschiedene Reaktoren (Mikrokanäle, Glas, ummantelte Reaktoren usw.), Destillations- oder Extraktionssysteme, Labor, Universität, Forschungsinstitut, Luft- und Raumfahrt, Chemie, Pharmazie, Petrochemie, Biochemie, Medizin, Krankenhaus, F&E-Werkstatt, Luft- und Raumfahrt, Biologie und andere Industrien.