Heating and Cooling Chillers

Kontaktieren Sie uns noch heute für die perfekte Lösung zur Temperaturkontrolle

Heating and cooling chillers are a new type of temperature control product that integrates multiple functions such as cooling, heating and constant temperature. Compared with single-function products such as traditional air conditioners, it can better save energy and reduce environmental pollution.

The principle of heating and cooling chillers

Heating and cooling chillers use a refrigeration cycle system, which uses a compressor, evaporator, condenser, throttling device and control system. In cooling mode, the heat of the equipment or space is discharged through the condenser and cold air is blown out at the same time, thus achieving the effect of Cooling effect. In the heating mode, a combination of compressor, evaporator, condenser, expansion valve, heater, etc. is used to absorb the heat of the equipment or environment through the indoor unit, and then compress it into high-temperature and high-pressure gas. After dissipating heat through the evaporator, Then the hot gas is released through the heat exchanger to achieve high temperature.

This kind of circulation system generally uses heat pump technology. Heat pumps use the natural temperature differences of air, water, underground water, etc. to absorb heat from low-temperature environmental media, compress and increase the temperature, and release the high-temperature heat to the room or equipment that needs to be heated. Heat pumps can be said to be a new energy-saving heating method because they use natural energy and require very little electricity. Only a small part of the electric energy is needed to drive the compressor to complete the entire cycle process. Therefore, heating and cooling chillers are highly efficient and Energy saving, environmental protection and other characteristics.

Functions of heating and cooling chillers

1. Refrigeration function: When the equipment or room is in a high-temperature environment, the equipment or outdoor air can be sucked in through the condenser, compressed by the compressor, and turned into a high-temperature and high-pressure gas, which is then diffused through the expansion valve, and the heat is then exchanged through the evaporator. discharge the device to the outdoors.

2. Heating function: Diffuse high-temperature equipment or indoor air to the evaporator of the outdoor unit through the expansion valve, so that the heat absorbs outdoor heat through the evaporator to form high-temperature and high-pressure gas, which can then release heat energy through the heat exchanger.

3. Hot water supply function: During the use of heating and cooling chillers, waste heat and other energy sources can also be used to provide users with hot water supply through accessories such as gas water heaters and solar water heaters.

4. Dehumidification and purification function: In severely humid and humid environments, the effect of dehumidifiers is more obvious. Not only can it quickly dehumidify, it can also purify indoor air through the high-efficiency filter equipped with the indoor unit, removing bacteria, viruses, ozone, dust and other harmful substances.

Advantages of heating and cooling chillers

1.Double effect

As a new type of product with both heating and cooling functions, heating and cooling chillers have dual functions. They are not only easy to use, but also have great advantages in economic benefits.

2. High efficiency, energy saving, environmental protection and health

Heating and cooling chillers are one of the most efficient temperature control methods in the world. They use the natural temperature difference of the air to not only greatly reduce the production of pollutants in the air, but also to significantly reduce indoor temperature and indoor humidity.

3. Various types

The appearance styles of heating and cooling chillers are rich and diverse, which not only can meet the needs of various industrial designs, but also are suitable for different manufacturers’ structures. Its compact design is very suitable for the needs of most manufacturers.

4. Low cost of use

Heating and cooling chillers have the advantages of high efficiency, energy saving and environmental protection, and their use cost is much lower than other single temperature control equipment.

In summary, heating and cooling chillers not only have dual functions, but also have the advantages of easy installation, energy saving, environmental protection, and low cost of use.

Wir bieten die Entwicklung und Herstellung kompletter Temperaturkontrollsysteme an. Von Standardmodellen bis zu kompletten kundenspezifischen Produkten bis hin zu 900 Tonnen. Wir haben uns auf den Kundenservice spezialisiert und sind bestrebt, jedem Kunden zu helfen, das optimale Temperaturkontrollsystem für seinen spezifischen Bedarf zu finden.

Wir bieten maßgeschneiderte Lösungen, die nicht dem Standard entsprechen. Es sind sowohl einzelne Kühlaggregate als auch kombinierte Kühl- und Heizaggregate erhältlich.

E-Mail: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Kühl- und Heizsysteme (Serie SUNDI)

(Benutzerdefinierte Designs)

Temperaturregelbereich: -120°C bis +350°C

Kühl- und Heizungsthermostate, die in verschiedenen Industriezweigen weit verbreitet sind.

Kühl- und Heizsysteme (WTD-Serie)

(Benutzerdefinierte Designs)

（Mikrokanal / Röhrenreaktoren spezialisiert）

Temperaturregelbereich: -70°C bis +300°C

Spezielles Design für Mikrokanäle (geringe Flüssigkeitsspeicherkapazität, starke Wärmeaustauschkapazität, Zirkulationssystem mit hohem Druckabfall)

Umwälzpumpen für Kühlung und Heizung

(Benutzerdefinierte Designs)

Temperaturregelbereich: -45°C bis +250°C

Heizungsumwälzpumpen

(Benutzerdefinierte Designs)

Temperaturregelbereich: +50°C bis +300°C

Hinweis: Die UC-Serie kann die Temperatur des Wärmeträgermediums regeln. Die UST-Serie kann nicht nur die Temperatur des Wärmeträgermediums, sondern auch die Temperatur des Reaktionsmaterials regeln.

TES-Reihe

(Benutzerdefinierte Designs)

Temperaturregelbereich: -85°C bis +250°C

LTS-Serie (fluorierte Flüssigkeit) 

(Benutzerdefinierte Designs)

Temperaturregelbereich: -80°C bis +80°C

TCU Multireaktoren Temperaturkontrollsystem

(Benutzerdefinierte Designs)

Temperaturregelbereich: -120°C bis +250°C

Kühlung Kaltwassersätze                                                                                                     

Rückkühler / Umwälzkühler

(Benutzerdefinierte Designs)

Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.

Kaltwassersätze / Kleinkaltwassersätze

(Benutzerdefinierte Designs)

Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.

Niedertemperatur-Kühlgeräte

(Benutzerdefinierte Designs)

Wir haben uns auf die Herstellung von Niedertemperaturkältemaschinen mit einem Temperaturregelbereich von bis zu -150°C spezialisiert, die den Kühlbedarf verschiedener Branchen decken.

Hochtemperatur-Kühlgeräte

(Benutzerdefinierte Designs)

Die Kältemaschine kann in verschiedenen Industrien und Labors eingesetzt werden und unterstützt kundenspezifische Designs.