Telefon: +86-18806176058
Suche Alle suchen
What is the correct method for testing the lab chiller? (1) . The internal surface of the FL +5°C ~ +35°C Water Chillers is tested by visual endoscope; (2) . Rapid detection: less than 10 seconds f...
Einzelheiten
What are the maintenance rules of the water chiller manufacturers? 1. What should be done for the daily maintenance of the FL +5°C ~ +35°C Water Chillers? ① The surface of the unit is clean. ③ Che...
Einzelheiten
What is the heat transfer principle of the chiller cooling system? Fluid connection indirect cooler is a cooler that connects two surface coolers by the heat carrier circulating in them. The heat...
EinzelheitenWhat is the treatment of the internal leakage of the coolant chiller? ① Disassemble the LX -25°C ~ +30°C Recirculating Chillers, remove the dirt on the surface of the plate, wipe it dry, and then r...
Einzelheiten
What is the operation mode of chiller recirculator? The two AC power supplies of the forced oil circulating air-cooled transformer cooler are mutually standby to ensure reliable power supply of the...
Einzelheiten
How to use the recirculating chiller? (1) LT -120°C ~ -70°C Cryogenic Recirculating Chillers and reaction kettle are connected by insulation pipe. For reaction kettles of different materials, atten...
EinzelheitenWhat is the cooling chiller cleaning method? Stop the machine and confirm that the pressure has been released, and pull down the main power switch. Open the air guide cover to clean the cover plate...
EinzelheitenWhat are the characteristics of the chiller cooler? (1) The FL-800N -18°C ~ +30°C Small Water Chiller adopts bare tube (no rolled fins on the surface) heat transfer tube, with high heat transfer co...
Einzelheiten
What are the safety operation rules for industrial water chillers? 1. Precautions for installation of air cooler. Please select a stable foundation before installing the LD -80°C ~ -30°C Ultra Low ...
EinzelheitenHow to select industrial cooler? The selection type of FL-800N -18°C ~ +30°C Small Water Chiller depends on the water source and water quality in the region. In the recycling system of chiller, the...
Einzelheiten
What causes the leakage of industrial chiller industrial? The water inlet and outlet of the FL +5°C ~ +35°C Water Chillers are leaking. Generally, the bolts at the connection are loose or cracked, ...
EinzelheitenWhat are the precautions for using the water-cooled cooler? The operating pressure at the oil side is not more than 1.0MPa, and the operating pressure at the water side is not more than 0.5MPa. Dra...
Einzelheiten
What should we pay attention to when using water cooled chiller in summer? If it is not used for a long time, a comprehensive inspection must be carried out before use. First, check whether the str...
EinzelheitenWhat should be paid attention to during the maintenance of air-cooled cooler? Although it may seem simple, maintaining a daily log of operating conditions, including the pressure and temperature of...
EinzelheitenHow to deal with the cooler failure? Failure of plate heat exchanger: 1. External leakage mainly includes leakage (small amount, discontinuous water droplets) and leakage (large amount, continuous ...
Einzelheiten
What is the cause of the cooler compressor failure? 1. What is the reason why the FL-800N -18°C ~ +30°C Small Water Chiller compressor cannot be started normally? Maintenance idea: (1) First check...
Einzelheiten
LNEYA
简体中文
