125 Ton Chiller – Water Cooled Chiller and Air Cooled Chiller

125 Ton Chiller – Water Cooled Chiller and Air Cooled Chiller

Industrial chillers, due to the different production processes of chemical products, the required temperature, medium, control, materials, etc. are also different. They are widely used in medicine, chemical industry, synthesis, liquefaction, crystallization, purification, low temperature quenching, and environmental testing of parts and components. , food, beverage, brewing, filling, vegetable preservation, cleaning, plastics, electronics, textiles, electroplating, electrophoretic coating, vacuum coating, papermaking, biology, mariculture, laboratories, hotels, banks, shopping malls and other industries and places.

Next we will introduce several energy-saving methods of 125 ton chiller

1. Lower the condensation temperature. Under the premise of meeting equipment safety and production requirements, try to increase the evaporation temperature and reduce the condensation temperature. For this reason, the transformation of the cooling tower has been increased to ensure the cooling water efficiency.

2. Adjust the reasonable operating load of the 125 ton chiller. In the case of ensuring the safe operation of the equipment, the power consumption per unit cooling capacity is smaller when the cooling host runs at 70-80 load than when it runs at 100 load. Using this method to start up should be considered comprehensively in combination with the operation of the water pump and cooling tower.

3. Prevent and reduce pipe fouling, so as to improve the heat exchange efficiency of condenser and evaporator. If the water treatment is not done well, the calcium carbonate and magnesium carbonate produced by the heating of calcium bicarbonate and magnesium bicarbonate will deposit on the pipe. Decrease the thermal conductivity, affect the heat exchange efficiency of the condenser and evaporator, and greatly increase the electricity cost of equipment operation. At this time, in addition to using water treatment technology, regular automatic cleaning equipment for pipelines can also be used for pipeline cleaning.

4. Use the chiller device to adjust the speed of the 125 ton chiller compressor. After the low-pressure refrigerant passes through the compressor, the pressure increases. The higher the speed of the compressor, the higher the pressure rise. In actual operation, most of the equipment is operated at a non-full load, and the compressor speed is automatically adjusted, so the energy-saving space is relatively large.

Soluciones personalizadas para su empresa

Refrigeradores de baja temperatura (por agua y por aire)

Rango de control de temperatura: -150°C a -5°C

Estamos especializados en la producción de refrigeradores de baja temperatura con un rango de control de temperatura de hasta -150°C, que pueden satisfacer las necesidades de refrigeración de diferentes industrias.

Enfriadoras de recirculación (Refrigeración por agua y por aire)

Rango de control de temperatura: -120°C a +30°C

Nuestro enfriador de recirculación adopta tecnología de refrigeración de baja temperatura, la temperatura es tan baja como -120℃, y varios accesorios son personalizables.

Refrigeradores de temperatura ambiente / Refrigeradores pequeños

Rango de control de temperatura: +5°C a +50°C

El enfriador puede utilizarse ampliamente en diversas industrias y laboratorios, y admite diseños personalizados.

Equipos frigoríficos de refrigeración directa

Rango de control de temperatura: -120°C a -10°C

Es adecuado para lugares con poca superficie de intercambio de calor y gran intercambio de calor.

Enfriadoras de temperatura ultrabaja de refrigeración directa

Rango de control de temperatura: -150°C a -110°C

Soluciones personalizadas para su empresa.

Refrigeradores de tornillo

Refrigeradores de tornillo de baja temperatura y refrigeradores de tornillo a temperatura ambiente

Soluciones personalizadas para su empresa.