2hp Chiller

2hp Chiller

Four common faults and solutions of 2hp chiller

First, the cooling effect is poor, no cooling

Reasons why the 2hp chiller has poor cooling effect or no cooling:

1. Compressor failure or damage

2. There is refrigerant leakage in the system

3. The display temperature of the computer board is abnormal

4. Overload fault

Solutions for the above situations:

Replace with a new compressor or find the source manufacturer of the chiller for repair;

If the refrigerant leaks, just add enough refrigerant;

If the computer board fails, it must be replaced directly;

Replace the 2hp chiller to achieve the required cooling effect.

Second, high voltage fault alarm

If there is a high-pressure alarm due to a factory operation error, you can solve it yourself by the following methods

1. Check whether the pipeline is unobstructed or blocked.

2. Check the evaporator for blisters and clean it in time.

3.2hp chiller is equipped with condenser, check and clean it regularly.

4. Check whether the control panel is damaged. If the panel is damaged, a high-voltage alarm will appear. At this time, just replace the control panel.

Third, low voltage fault alarm

1. If the pressure is too low, it means that the refrigerant is leaking, and it is enough to find the leak point and make up for it.

2. The pressure controller is damaged, replace it with a new one.

3. The filter is blocked; find out the location of the blockage, unblock it or replace it with a new filter device.

Fourth, water leakage occurs

1. There is water leakage in the water tank; if this happens, go directly to the manufacturer for repair or replace the water tank with a new one.

2. The water pump is leaking; find the manufacturer to replace it.

3. The ball valve is leaking; replace it with a new one.

4. The floating ball leaks water; if the floating ball leaks, it may be that the position of the floating ball is loose or the position is not installed correctly, just re-adjust the position.

Note: If there is water leakage in the water tank, water pump and ball valve, if you find the manufacturer to replace it within the warranty period, it will be free of charge. If the warranty period is over, you will have to pay for it yourself.

Soluciones personalizadas para su empresa

Refrigeradores de baja temperatura (por agua y por aire)

Rango de control de temperatura: -150°C a -5°C

Estamos especializados en la producción de refrigeradores de baja temperatura con un rango de control de temperatura de hasta -150°C, que pueden satisfacer las necesidades de refrigeración de diferentes industrias.

Enfriadoras de recirculación (Refrigeración por agua y por aire)

Rango de control de temperatura: -120°C a +30°C

Nuestro enfriador de recirculación adopta tecnología de refrigeración de baja temperatura, la temperatura es tan baja como -120℃, y varios accesorios son personalizables.

Refrigeradores de temperatura ambiente / Refrigeradores pequeños

Rango de control de temperatura: +5°C a +50°C

El enfriador puede utilizarse ampliamente en diversas industrias y laboratorios, y admite diseños personalizados.

Equipos frigoríficos de refrigeración directa

Rango de control de temperatura: -120°C a -10°C

Es adecuado para lugares con poca superficie de intercambio de calor y gran intercambio de calor.

Enfriadoras de temperatura ultrabaja de refrigeración directa

Rango de control de temperatura: -150°C a -110°C

Soluciones personalizadas para su empresa.

Refrigeradores de tornillo

Refrigeradores de tornillo de baja temperatura y refrigeradores de tornillo a temperatura ambiente

Soluciones personalizadas para su empresa.