Sistema de circulación de agua de refrigeración

Póngase en contacto con nosotros hoy mismo para obtener la solución de control de temperatura perfecta

The circulating cooling water system is configured for water cooling of production equipment. A cooling water system that uses water as the cooling medium and circulates it. After the cold water flows through the production equipment that needs to be cooled (often called heat exchange equipment, such as heat exchangers, condensers, and reactors), the temperature rises. If it is discharged immediately, the cold water is only used once (called a once-through cooling water system). When the heated cold water flows through the cooling equipment, the water temperature will drop back, and it can be pumped back to the production equipment for reuse. The consumption of cold water is greatly reduced, and more than 95% can often be saved. Cooling water accounts for about 70% of industrial water consumption. Therefore, the circulating cooling water system plays a role in saving a large amount of industrial water.

Cooling equipment can be divided into open and closed types, so circulating cooling water systems are also divided into open and closed types.

Open systems are more complex to design and operate. There are two types of open cooling equipment: cooling pools and cooling towers, both of which mainly rely on the evaporation of water to reduce water temperature. Furthermore, cooling towers often use fans to promote evaporation, and the cooling water is often blown away. Therefore, the open circulating cooling water system must be supplied with fresh water. Due to evaporation, the circulating water is concentrated, and the concentration process will promote salt scaling. Supplementary water has a dilution effect, and its flow rate is often determined based on the concentration limit of circulating water. Usually the amount of supplementary water exceeds the amount of water lost by evaporation and wind blowing, so some circulating water (sewage) must be discharged to maintain the balance of water volume.

In an open system, due to the contact between water flow and the atmosphere, dust, microorganisms, etc. enter the circulating water; in addition, the escape of carbon dioxide and the leakage of materials in the heat exchange equipment also change the quality of the circulating water. For this reason, circulating cooling water often needs to be treated, including sediment control, corrosion control and microbial control. The determination of the treatment method is often related to the quantity and quality of the make-up water, as well as the performance of the production equipment. When using multiple agents, possible chemical reactions between agents should be avoided.

Closed circulating cooling water system uses closed cooling equipment, and the circulating water flows in the tube and usually uses wind to dissipate heat outside the tube. Except for material leakage from heat exchange equipment, there are no other factors that change the quality of circulating water. To prevent salt scaling in heat exchange equipment, cooling water sometimes needs to be softened. In order to prevent heat exchange equipment from being corroded, corrosion inhibitors are often added: Pay attention to safety when using high-concentration, highly toxic corrosion inhibitors, and the cooling water discharged during maintenance should be properly disposed of.

Correo electrónico: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Enfriadoras de precisión / Enfriadoras pequeñas

(Diseños a medida)

El enfriador puede utilizarse ampliamente en diversas industrias y laboratorios, y admite diseños personalizados.

Enfriadoras de recirculación

(Diseños a medida)

Nuestro enfriador de recirculación adopta tecnología de refrigeración de baja temperatura, la temperatura es tan baja como -120℃, y varios accesorios son personalizables.

Refrigeradores de baja temperatura

(Diseños a medida)

Estamos especializados en la producción de refrigeradores de baja temperatura con un rango de control de temperatura de hasta -150°C, que pueden satisfacer las necesidades de refrigeración de diferentes industrias.

Enfriadoras para pruebas en automoción

(Diseños a medida)

Simulación de temperatura para pruebas de calidad de vehículos: prueba de duración de baterías, banco de pruebas de inyectores/motores de combustible, prueba de airbags, banco de pruebas de componentes, etc.

Enfriadoras para semiconductores

(Diseños a medida)

Adecuado para el control preciso de la temperatura de los componentes electrónicos. En la fabricación de componentes electrónicos semiconductores para entornos adversos, las fases de ensamblaje de embalajes de CI y de pruebas de ingeniería y producción incluyen pruebas térmicas electrónicas y otras simulaciones de pruebas ambientales.

Refrigeración líquida para sistemas de almacenamiento de energía en baterías

(Diseños a medida)

Serie ZLFQ

(Diseños a medida)

Unidad de distribución de refrigerante

El equipo de refrigeración líquida es adecuado para pruebas de semiconductores, pruebas de temperatura constante de equipos electrónicos, infraestructura de soporte de servidores de refrigeración y otros lugares de control de temperatura de fluidos.

Serie de mandriles térmicos MD

(Diseños a medida)

Se utiliza para probar dispositivos de radiofrecuencia y dispositivos de potencia de alta densidad (IGBT y MOSFET), y también puede utilizarse para el enfriamiento rápido de paneles planos de laboratorio (plasma, productos biológicos, baterías), etc.

Refrigeradores de tornillo (Diseños a medida)

Refrigeradores de tornillo de baja temperatura y refrigeradores de tornillo a temperatura ambiente