Distillation Cooling Water System

Póngase en contacto con nosotros hoy mismo para obtener la solución de control de temperatura perfecta

Introduction to distillation cooling water system

The distillation cooling water system refers to a machine that prepares pure water through distillation. Distilled water can be divided into once and multiple times. After the water is distilled once, the non-volatile components in the container are removed, and the volatile components enter the initial fraction of distilled water. Usually only the middle part of the fraction is collected, accounting for about 60%. In order to obtain purer water, add alkaline potassium permanganate solution to primary distilled water to remove organic matter and carbon dioxide; add non-volatile acid to turn ammonia into non-volatile ammonium salts. Since glass contains a small amount of water-soluble components, quartz stills can be used to obtain very pure water during secondary or multiple distillations. The pure water obtained should be stored in quartz or silver containers.

Characteristics of distillation cooling water system

Evaporator: Use tube falling film evaporation technology to ensure that the feed water is evenly distributed on the inner wall of each evaporation tube to form water film evaporation. The upper-effect pure steam provides heat energy to the lower-effect evaporator and completes its evaporation and liquefaction to form distilled water.

Vapor-liquid separator: adopts split-type four-separation technology for soda and water (centrifugal separation of soda and water, down-rotating blade separator, wire mesh to capture water droplets, and upper-rotating blade separator) to ensure that the distilled water has low water heat source and endotoxin content. . The requirements for pure water are relatively low, and distilled water that meets pharmacopoeia standards can be produced below single-stage reverse osmosis (10us/cm).

Preheater: U-shaped tube heat exchanger, heat exchanger, good mechanical performance and long service life.

Condenser: Unique double condenser design, special multi-pass structure, sufficient heat exchange, no need for cooling water to reach the required temperature of distilled water.

Pipeline: The pipeline design has no water storage, no dead ends, and low equipment failure rate. Pipe connections adopt new sanitary clamp connections. The inside and outside are mirror polished, arranged neatly and beautifully, and the operation is quick and convenient.

Configuration: regulating valve, automatic compensation valve, throttle valve, conductivity meter, and thermometer are all high-tech products at home and abroad, with beautiful appearance and complete functions.

Water source: The water source required by the equipment must be pure water produced by reverse osmosis water.

Insulation: Both the evaporator and preheater are made from chlorine- and asbestos-free mineral wool insulation and covered with stainless steel cladding.

Economical and energy-saving: Because the multi-effect distilled water machine uses secondary steam step by step for each effect, the industrial steam utilization rate is high and the energy-saving effect is obvious. As the efficiency of the evaporator increases, this energy saving effect becomes more obvious. At the same time, the amount of cooling water also decreases greatly as the number of effects increases.

Control system: Adopts PLC automatic control technology to meet customers’ different control requirements. From the basic judgment and distribution of distilled water quality, to the continuous adjustment of each medium, linkage with the storage system, hierarchical password control and even the control of evaporation changes and other more advanced ones, it can be said that it is meticulous.

Paperless records: Use paperless records to record actual production conditions.

Factory performance test of the complete machine: In the complete machine test workshop, the actual working environment is simulated and the complete machine is tested according to the determined procedures.

Correo electrónico: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Enfriadoras de precisión / Enfriadoras pequeñas

(Diseños a medida)

El enfriador puede utilizarse ampliamente en diversas industrias y laboratorios, y admite diseños personalizados.

Enfriadoras de recirculación

(Diseños a medida)

Nuestro enfriador de recirculación adopta tecnología de refrigeración de baja temperatura, la temperatura es tan baja como -120℃, y varios accesorios son personalizables.

Refrigeradores de baja temperatura

(Diseños a medida)

Estamos especializados en la producción de refrigeradores de baja temperatura con un rango de control de temperatura de hasta -150°C, que pueden satisfacer las necesidades de refrigeración de diferentes industrias.

Enfriadoras para pruebas en automoción

(Diseños a medida)

Simulación de temperatura para pruebas de calidad de vehículos: prueba de duración de baterías, banco de pruebas de inyectores/motores de combustible, prueba de airbags, banco de pruebas de componentes, etc.

Enfriadoras para semiconductores

(Diseños a medida)

Adecuado para el control preciso de la temperatura de los componentes electrónicos. En la fabricación de componentes electrónicos semiconductores para entornos adversos, las fases de ensamblaje de embalajes de CI y de pruebas de ingeniería y producción incluyen pruebas térmicas electrónicas y otras simulaciones de pruebas ambientales.

Refrigeración líquida para sistemas de almacenamiento de energía en baterías

(Diseños a medida)

Serie ZLFQ

(Diseños a medida)

Unidad de distribución de refrigerante

El equipo de refrigeración líquida es adecuado para pruebas de semiconductores, pruebas de temperatura constante de equipos electrónicos, infraestructura de soporte de servidores de refrigeración y otros lugares de control de temperatura de fluidos.

Serie de mandriles térmicos MD

(Diseños a medida)

Se utiliza para probar dispositivos de radiofrecuencia y dispositivos de potencia de alta densidad (IGBT y MOSFET), y también puede utilizarse para el enfriamiento rápido de paneles planos de laboratorio (plasma, productos biológicos, baterías), etc.

Refrigeradores de tornillo (Diseños a medida)

Refrigeradores de tornillo de baja temperatura y refrigeradores de tornillo a temperatura ambiente