Heating and Cooling Circulator for Process System

Póngase en contacto con nosotros hoy mismo para obtener la solución de control de temperatura perfecta

The heating and cooling circulator for process system consists of many accessories, such as compressor, condenser, expansion valve, heat exchanger, temperature controller, circulation pump, pre-cooling unit, heating unit, refrigeration unit, etc. Each component has its own Each has its own functions and advantages.

Components of heating and cooling circulator for process system:

1. Compressor: The most important of these components is the compressor, which mainly plays the role of refrigeration and is called the “heart” of the equipment. A high-quality compressor can not only maintain stable operation of the equipment, but also ensure good energy efficiency. .

2. Evaporator and condenser: The evaporator and condenser play the role of absorbing and releasing heat respectively. Sufficient and appropriate heat exchange can give full play to the efficiency of the compressor. If the heat exchange of the condenser is insufficient, it will directly Affecting the cooling effect of the unit, high pressure is prone to occur in summer, and even shutdown due to excessive high pressure. The heat exchange rate of the evaporator is more important. Insufficient heat exchange rate will not only cause low efficiency of the unit, but also cause the refrigerant to be unable to completely evaporate and return directly to the compressor, causing liquid shock and damage to the compressor, thus causing the entire unit to lose heat. The device cannot be used.

3. Expansion valve: The expansion valve is both a flow regulating valve in the heating and cooling circulator for process system and a throttle valve in the refrigeration equipment. Its main function is to throttle the high-pressure and normal-temperature refrigerant liquid when it flows through the thermal expansion valve. The pressure is reduced and the wet vapor of low-temperature and low-pressure refrigerant enters the evaporator, vaporizes and absorbs heat in the evaporator, and achieves the purpose of refrigeration.

Correo electrónico: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Sistemas de refrigeración y calefacción (serie SUNDI)

(Diseños a medida)

Rango de control de temperatura: -120°C a +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Sistemas de refrigeración y calefacción (serie WTD)

(Diseños a medida)

（Microcanales / reactores tubulares especializados）

Rango de control de temperatura: de -70°C a +300°C

Diseño especializado para microcanal (pequeña capacidad de retención de líquido, gran capacidad de intercambio de calor, sistema de circulación de alta caída de presión)

Circuladores de refrigeración y calefacción

(Diseños a medida)

Rango de control de temperatura: -45°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Termostatos de circulación

(Diseños a medida)

Rango de control de temperatura: +50°C a +300°C

Nota: La serie UC puede controlar la temperatura del medio de transferencia de calor. La serie UST no solo puede controlar la temperatura del medio de transferencia de calor, sino también la temperatura del material de reacción.

TCU Sistema de control de temperatura multirreactores

(Diseños a medida)

Rango de control de temperatura: -120°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.