Chiller 10 Toneladas

Contactez-nous dès aujourd'hui pour une solution parfaite de contrôle de la température

Components of chiller 10 toneladas

Compressor: Responsible for compressing the refrigerant and increasing its temperature and pressure.

Condenser: used for heat exchange between refrigerant and cooling water to condense the refrigerant into liquid.

Expansion valve: Responsible for reducing the pressure of the refrigerant to form a low-temperature and low-pressure liquid-gas mixture.

Evaporator: used for the refrigerant to absorb the heat of the cooling water to prepare cold water.

Control system: including temperature sensors, pressure sensors, liquid level gauges, etc., responsible for monitoring and adjusting the operating status of the entire system.

Chiller 10 toneladas features and benefits

1. Compact structure and smooth operation.

The condenser and dry evaporator of chiller 10 toneladas adopt high-efficiency heat transfer tubes, and the main engine adopts imported high-efficiency semi-hermetic twin-screw compressor, which has many advantages such as compact structure, small size, light weight, and small installation location. The semi-hermetic twin-screw compressor has few moving parts. The compressor uses a 5:6 ultra-efficient screw rotor. There is no direct wear between the rotors and it has high reliability. Since the screw machine is a continuous compressor without pulsation, the unit has the characteristics of stable performance, low noise, small vibration and smooth operation. The efficiency is 20%-30% higher than that of reciprocating compressors.

2. Complete energy control system.

The chiller 10 toneladas has a four-level capacity control system that automatically adjusts the start and stop of the unit according to load changes, making it more energy-saving. During operation, the computer control system will change the energy output of the unit according to changes in the client’s heat load. The microcomputer quickly determines and sends a signal to push the slide valve to the required energy by monitoring the difference between the measured actual load and the user’s setting. And in multiple systems, it works in an optimized way with the lowest power consumption at the best cooling capacity. It not only shows excellent performance at full load, but also has high operating efficiency even at partial load.

3. Independent refrigeration cycle system.

chiller 10 toneladas have two or more independent refrigeration circuits. Even if one circuit fails or is under maintenance, the other circuit can still operate normally. With backup function, it is especially suitable for use in industrial non-stop environments.

4. Easy and intuitive operation.

The chiller 10 toneladas uses a microcomputer programmable controller with a touch screen display. Follow the menu selections on the screen and touch the display button on the screen directly with your finger to start the unit. The screen can display the operating status of the unit at any time, and can display parameters in graphics and text tables at a glance.

5. Protection function of microcomputer controller.

It has the protection of compressor coil temperature being too high, oil preheating timer switch, cold water flow switch, cold water outlet temperature too low protection, exhaust temperature too high protection, compressor overload protection, power failure memory function, frequent start and stop protection, Protection functions such as voltage abnormality protection, low oil level protection, high and low voltage protection, etc.

6. Multiple protections, safe and reliable.

chiller 10 toneladas In addition to the internal protection module of the compressor providing over-under-voltage, phase loss, overload and other functions to protect the compressor, the pressure control and other devices of the refrigeration system can make the unit work foolproof.

7. Freezing medium.

The chiller 10 toneladas uses ethylene glycol antifreeze, and can also be designed to use salt water as antifreeze according to user requirements.

8. Easy to install.

The chiller 10 toneladas has completed all component installation, operation testing, and has been filled with refrigerant and refrigeration oil in the factory. Users only need to connect water lines and electrical circuits before it can be put into use, reducing installation and debugging time.

Nous assurons la conception et la fabrication de systèmes complets de contrôle de la température. Des modèles standard aux produits personnalisés complets jusqu'à 900 tonnes. Nous sommes spécialisés dans le service à la clientèle et nous nous efforçons d'aider chaque client à obtenir le système de contrôle de la température optimal pour ses besoins spécifiques.

Nous fournissons des solutions personnalisées non standard. Nous proposons aussi bien des refroidisseurs à simple refroidissement que des unités combinées de refroidissement et de chauffage.

Courriel : info@lneya.com    ID WeChat : +8615251628237    WhatsApp : +86 17851209193

Refroidisseurs                                                                                                     

Refroidisseurs à circulation / Circulateurs frigorifiques

(Modèles sur mesure)

Le refroidisseur peut être largement utilisé dans diverses industries et laboratoires, et peut être conçu sur mesure.

Refroidisseurs d'eau / Petits refroidisseurs

(Modèles sur mesure)

Le refroidisseur peut être largement utilisé dans diverses industries et laboratoires, et peut être conçu sur mesure.

Refroidisseurs à basse température

(Modèles sur mesure)

Nous sommes spécialisés dans la production de refroidisseurs à basse température avec une plage de contrôle de la température allant jusqu'à -150°C, qui peuvent répondre aux besoins de réfrigération de différentes industries.

Refroidissement et chauffage Chillers                                                                            

Refroidissement et chauffage Chillers

(Modèles sur mesure)

Plage de contrôle de la température : -120°C à +350°C

thermostat de refroidissement et de chauffage, largement utilisé dans diverses industries.

Refroidisseurs à circulation

(Modèles sur mesure)

Plage de contrôle de la température : -45°C à +250°C