Best Cooling and Heating System for Chemical

Contactez-nous dès aujourd'hui pour une solution parfaite de contrôle de la température

The cooling and heating system for chemical uses the refrigeration system to cool the liquid medium below the set temperature, and then transports the medium to the equipment that needs to be controlled, and raises or lowers the temperature of the equipment to the required temperature range through heat exchange. When the equipment reaches the required temperature, the refrigeration system stops working, and the medium is returned to the refrigeration system for heating or cooling for the next use.

Installation steps of cooling and heating system for chemical

1. Choose a suitable installation location: It should be installed in a well-ventilated, dry, dust-free, and corrosive gas-free environment. At the same time, the equipment should be protected from direct sunlight and rain.

2. Connect the power supply: Connect the power cord to the power socket that meets the requirements of the device. Ensure that the power supply voltage is stable to avoid damage to equipment caused by voltage fluctuations.

3. Connect the cooling water system: Connect the water inlet and outlet to the cooling water system. Make sure the cooling water pressure and flow rate meet equipment requirements.

4. Connect the heat exchanger: Connect the heat exchanger to the medium pipe that needs to be heated or cooled. Make sure the pressure and flow rate of the medium meet the equipment requirements.

Debugging steps for cooling and heating system for chemical

1. Check the equipment: Before starting, check whether the appearance of the equipment is damaged, whether the components are firmly installed, and whether the power cord is connected correctly.

2. Set temperature: Set the target temperature according to test requirements. Note that the target temperature should be within the device’s operating temperature range.

3. Start the device: Turn on the power switch and the device starts running. At this time, the operating status of the equipment should be closely observed, and if there is any abnormality, it should be stopped immediately for inspection.

4. Adjust parameters: During the operation of the equipment, timely adjust the parameters of the equipment, such as temperature, pressure, flow, etc., according to actual test requirements.

5. Check the equipment performance: After the equipment has been running for a period of time, check whether the performance of the equipment meets the test requirements. If there are problems, adjustments should be made in time.

Precautions for cooling and heating system for chemical

1. Installation and debugging should be carried out by professionals to prevent equipment damage or personal injury caused by improper operation.

2. During the operation of the equipment, regular maintenance and inspections should be carried out to ensure the normal operation of the equipment.

3. When the equipment fails, it should be stopped immediately and inspected and repaired by professionals.

Courriel : info@lneya.com    ID WeChat : +8615251628237    WhatsApp : +86 17851209193

Systèmes de refroidissement et de chauffage (série SUNDI)

(Modèles sur mesure)

Plage de contrôle de la température : -120°C à +350°C

Application : Réacteurs divers (microcanaux, réacteurs en verre, réacteurs à double enveloppe, etc.), système de distillation ou d'extraction, laboratoire, université, institut de recherche, aérospatiale, industrie automobile, test de semi-conducteurs et d'électricité, industrie chimique, pharmaceutique, pétrochimique, biochimique, médicale, hospitalière, atelier de R&D, aérospatiale, biologique et autres industries.

Systèmes de refroidissement et de chauffage (série WTD)

(Modèles sur mesure)

（Micro canal / réacteurs tubulaires spécialisés）

Plage de contrôle de la température : -70°C à +300°C

Conception spécialisée pour les microcanaux (faible capacité de rétention des liquides, forte capacité d'échange thermique, système de circulation à forte perte de charge).

Circulateurs de chauffage et de refroidissement

(Modèles sur mesure)

Plage de contrôle de la température : -45°C à +250°C

Application : Réacteurs divers (microcanaux, réacteurs en verre, réacteurs à double enveloppe, etc.), système de distillation ou d'extraction, laboratoire, université, institut de recherche, aérospatiale, industrie chimique, pharmaceutique, pétrochimique, biochimique, médicale, hospitalière, atelier de R&D, aérospatiale, biologique et autres industries.

Circulateurs de chauffage

(Modèles sur mesure)

Plage de contrôle de la température : +50°C à +300°C

Note : La série UC peut contrôler la température du fluide caloporteur. La série UST peut non seulement contrôler la température du fluide caloporteur, mais aussi la température du matériau de réaction.