Refroidisseur d'eau extérieur

Contactez-nous dès aujourd'hui pour une solution parfaite de contrôle de la température

What is an outdoor water cooled chiller?

An outdoor water cooled chiller is one of those water chillers that removes heat from the water used in projects and industrial structures and puts the water back into the running cycle. In effect, a chiller moves heat from a space that requires temperature control to another space. Therefore, the chiller is not a means of generating cold, but a means of dissipating heat, whose task is to facilitate the transfer of unwanted and undesired heat caused by activity to places outside the system.

Cooling towers are specially designed for outdoor water cooled chillers. Because the condenser of a water-cooled chiller uses water as a stimulus and cooling material. The efficiency of a water-cooled chiller increases because wet surfaces are more successful at transferring heat and can do compression work at wetter temperatures.

How does outdoor water cooled chiller work?

Water-cooled chillers come into play during the evaporation process, the water and gas produced by the machine are taken to the evaporator and collect all the unwanted heat on the way and then return to the evaporator and store the obtained heat energy. After that, the refrigerant collects this heat and mobilizes it into the condensate, that is, the condenser sends all the collected heat to the cooling tower, and finally the hot air will pass through the cooling coil and dissipate the heat to the atmosphere.

The first stage:

The starting point of this cycle is where the water from the production process enters the evaporator and enters the cooling cycle.

During this part of the cycle, the heat absorbed by the refrigerant first appears in the form of a phase change from liquid to gas phase. As the refrigerant absorbs heat from the water, the temperature of the environment in contact with this part drops, so the water leaves at a lower temperature. This water enters the fan coil and carries the cool air to the desired space.

In fact, the evaporator is a place that, in addition to the current cycle, participates in another cycle, which is located between the evaporator and the water outlet of the cooling device. In fact, hot water enters the chiller evaporator, which cools it and then pumps it throughout the building to where it is needed.

second stage:

The gaseous refrigerant reaches the gas phase in the pre-liquid state and then enters the compressor. In the compressor, the gas condenses and the temperature and pressure increase so that it can enter the next high-pressure stage. The rise in pressure and temperature as it leaves the compressor is important because the refrigerant needs to release heat from inside the condenser, so it must carry enough heat to the condenser.

Another key function of the compressor is to draw refrigerant into the evaporator at the right time, keeping the pressure within the evaporator high enough to absorb the heat again.

The third phase:

The high-temperature gas enters the condenser, where the gaseous refrigerant is converted into a saturated, high-pressure liquid. This is a constant pressure process.

Since the condenser exists in another loop between the cooling towers, the water enters the cooling tower after the temperature rises. Because the main task of the cooling tower in a water-cooled chiller is to cool the consumed water, and the condenser uses this water as its driving material.

Where the excess heat of the water disappears and the water temperature returns to the desired low temperature. The heating process we mentioned earlier occurs in the condenser, releasing the gaseous refrigerant from the heat itself, which is the source of heat in question and needs to be eliminated by the cooling tower. In this way, the water entering the cooling tower from the condenser comes into contact with the air flow, transfers heat to the air, and then returns to the condenser.

The fourth stage:

The expansion valve is the last stage of the refrigerant and the refrigerant in the expansion valve undergoes these processes causing the refrigerant to become a mixture of liquid and gas and the same compounds re-enter the evaporator to resume the cycle.

Courriel : info@lneya.com    ID WeChat : +8615251628237    WhatsApp : +86 17851209193

Refroidisseurs de précision / Petits refroidisseurs

(Modèles sur mesure)

Le refroidisseur peut être largement utilisé dans diverses industries et laboratoires, et peut être conçu sur mesure.

Refroidisseurs à circulation

(Modèles sur mesure)

Notre refroidisseur à circulation adopte une technologie de réfrigération à basse température, la température est aussi basse que -120℃, et divers accessoires sont personnalisables.

Refroidisseurs à basse température

(Modèles sur mesure)

Nous sommes spécialisés dans la production de refroidisseurs à basse température avec une plage de contrôle de la température allant jusqu'à -150°C, qui peuvent répondre aux besoins de réfrigération de différentes industries.

Chillers for Automotive Test

(Modèles sur mesure)

Simulation de la température pour les tests de qualité des véhicules : test de durée de vie de la batterie, banc d'essai de l'injecteur de carburant/du moteur, test de l'airbag, banc d'essai des composants, etc.

Chillers for Semiconductor

(Modèles sur mesure)

Convient pour le contrôle précis de la température des composants électroniques. Lors de la fabrication de composants électroniques semi-conducteurs destinés à des environnements difficiles, les phases d'assemblage, d'ingénierie et d'essais de production de l'emballage des circuits intégrés comprennent des essais thermiques électroniques et d'autres simulations d'essais environnementaux.

Refroidissement par liquide pour les systèmes de stockage d'énergie par batterie

(Modèles sur mesure)

Série ZLFQ

(Modèles sur mesure)

Unité de distribution du liquide de refroidissement

L'équipement de refroidissement liquide convient aux tests de semi-conducteurs, aux tests de température constante des équipements électroniques, au refroidissement de l'infrastructure de soutien des serveurs et à d'autres lieux de contrôle de la température des fluides.

Série de mandrins thermiques MD

(Modèles sur mesure)

Il est utilisé pour tester les dispositifs RF et les dispositifs de puissance à haute densité (IGBT et MOSFET), et peut également être utilisé pour le refroidissement rapide des panneaux plats de laboratoire (plasma, produits biologiques, batteries), etc.

Refroidisseurs à vis (Modèles sur mesure)

Refroidisseurs à vis à basse température et refroidisseurs à vis à température ambiante