Heater and Cooling System

Heater and Cooling System

The heater and cooling system is a cooling and heating temperature control system produced by our company. It is suitable for heating and exothermic process control during the reaction process. It can linearly control the temperature of the material in the kettle. The program control mode can be selected, and the temperature difference between the heat transfer medium and the material can also be adjusted. It can be set, the whole system adopts a fully closed cycle, no oil mist will be generated at high temperature, and no moisture will be absorbed at low temperature. There is an expansion tank in the system, and the heat transfer medium expands with heat and contracts with cold during the cooling and heating process.

1. Application introduction of heater and cooling system:

Biomedicine: laboratory-level pilot test, supporting constant temperature control of cold and heat sources such as glass reactors and fermentation tanks.

Petrochemical industry: supporting constant temperature control of cold and heat sources such as stainless steel kettles and enamel kettles, and chemical synthesis.

Aerospace: Simulation of environmental conditions, research and development of aerospace propellants and special polymer materials.

Semiconductor: semiconductor and optoelectronic industry equipment cooling and heating, component testing and temperature control.

Automobile: battery discharge test, gearbox performance test and material aging test at low temperature and high temperature.

University laboratories: constant temperature control of reaction processes such as synthesis and separation.

2. Application introduction of heater and cooling system:

Biomedicine: Supporting small rotary evaporators, glass reactors and other separation and extraction experiments, condensation and chemical synthesis, etc.

Material petroleum: supporting viscometer, rheometer, X-ray diffraction spectrum and other liquid viscosity measurement, constant temperature and material structure detection, etc.

Microorganisms: supporting fermentation tanks and other winemaking, enzyme engineering and environmental constant temperature, etc.

Food: Supporting Soxhlet extraction, Kjeldahl nitrogen analyzer and other fat extraction, condensation, wine making, research and development determination, etc.

University laboratories: Calibration of thermometers, constant temperature heating or cooling of test tubes, flasks, and beakers, etc.

3. Introduction of application of glass reactor for heater and cooling system:

Biomedicine: chemical synthesis, used for reflux, distillation, concentration, crystallization, extraction, etc., can be used with a constant temperature circulator.

Petrochemical industry: solvent recovery, used for single-component distillation, multi-component fractionation, rectification purification or chemical synthesis, etc.

Energy: fuel cells, catalytic reactions, filtration and washing, etc.

Cosmetics: material dispersion, emulsification, homogenization, mixing, extraction, etc.

University laboratories: heating/cooling of reaction materials, laboratory synthesis, catalysis or chemical reactions under other inert gas conditions, etc.

4. Application introduction of rotary evaporator for heater and cooling system:

Biomedicine: Separation and purification of drug materials and liquids, concentration and drying, etc., can be used with circulating coolers and vacuum pumps.

Petrochemical industry: solvent recycling, vacuum distillation of high boiling point substances, etc.

Cosmetics: essential oil extraction, low temperature separation, emulsification under reduced pressure, etc.

University laboratories: separation of commonly used solvents, concentration and drying of composites, distillation of water, etc.

5. Application introduction of heater and cooling system:

Biomedicine: Supporting small rotary evaporators, small glass reactors and other separation and extraction experiments, condensation, etc.

Food: Supporting Soxhlet extraction, Kjeldahl nitrogen analyzer and other fat extraction, condensation, etc.

University laboratories: instead of cooling water, reflux, distillation, rectification and other condensation in rotary evaporators and flask reaction devices.

The heater and cooling system can be used in medicine, chemical industry, food, biology, petroleum, light industry, metallurgy, energy, semiconductor, aerospace, automobile, instrumentation and other industries.

Customized Solutions For Your Business

Cooling and Heating Systems (SUNDI series)

Temperature Control Range: -120°C to +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Cooling and Heating Systems (WTD series)

（Micro channel / tube reactors specialized）

Temperature Control Range: -70°C to +300°C

Specialized design for micro channel (small liquid holding capacity, strong heat exchange capacity, circulation system high pressure drop)

Cooling and Heating Systems (TES series)

Temperature Control Range: -85°C ~ +250°C

Temp Control Accuracy: ± 0.3°C

Cooling and Heating Machines (LTS series)

Temperature Control Range: -80°C to +80°C

It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.

Cooling and Heating Circulators

Temperature Control Range: -45°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Heating Circulators

Temperature Control Range: +50°C to +300°C

Note: UC series can control the temperature of heat transfer medium. UST series can not only control the temperature of the heat transfer medium, but also control the temperature of the reaction material.

TCU Multi-reactors Temperature Control System

Temperature Control Range: -120°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.