125 Ton Chiller – Water Cooled Chiller and Air Cooled Chiller

125 Ton Chiller – Water Cooled Chiller and Air Cooled Chiller

Industrial chillers, due to the different production processes of chemical products, the required temperature, medium, control, materials, etc. are also different. They are widely used in medicine, chemical industry, synthesis, liquefaction, crystallization, purification, low temperature quenching, and environmental testing of parts and components. , food, beverage, brewing, filling, vegetable preservation, cleaning, plastics, electronics, textiles, electroplating, electrophoretic coating, vacuum coating, papermaking, biology, mariculture, laboratories, hotels, banks, shopping malls and other industries and places.

Next we will introduce several energy-saving methods of 125 ton chiller

1. Lower the condensation temperature. Under the premise of meeting equipment safety and production requirements, try to increase the evaporation temperature and reduce the condensation temperature. For this reason, the transformation of the cooling tower has been increased to ensure the cooling water efficiency.

2. Adjust the reasonable operating load of the 125 ton chiller. In the case of ensuring the safe operation of the equipment, the power consumption per unit cooling capacity is smaller when the cooling host runs at 70-80 load than when it runs at 100 load. Using this method to start up should be considered comprehensively in combination with the operation of the water pump and cooling tower.

3. Prevent and reduce pipe fouling, so as to improve the heat exchange efficiency of condenser and evaporator. If the water treatment is not done well, the calcium carbonate and magnesium carbonate produced by the heating of calcium bicarbonate and magnesium bicarbonate will deposit on the pipe. Decrease the thermal conductivity, affect the heat exchange efficiency of the condenser and evaporator, and greatly increase the electricity cost of equipment operation. At this time, in addition to using water treatment technology, regular automatic cleaning equipment for pipelines can also be used for pipeline cleaning.

4. Use the chiller device to adjust the speed of the 125 ton chiller compressor. After the low-pressure refrigerant passes through the compressor, the pressure increases. The higher the speed of the compressor, the higher the pressure rise. In actual operation, most of the equipment is operated at a non-full load, and the compressor speed is automatically adjusted, so the energy-saving space is relatively large.

カスタマイズされたソリューション

低温チラー（水冷式・空冷式）

温度制御範囲：-150℃～-5

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

循環式チラー (水冷・空冷）

温度制御範囲：-120℃～+30

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

室温チラー/小型チラー

温度制御範囲+5℃〜+50

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

直接冷却式冷凍機

温度制御範囲：-120℃～-10

熱交換面積が小さく、熱交換が大きい場所に適している。

直接冷却式超低温チラー

温度制御範囲：-150℃～-110

お客様のビジネスにカスタマイズされたソリューションを提供します。

スクリュー冷凍機

低温スクリュー冷凍機と常温スクリュー冷凍機

お客様のビジネスにカスタマイズされたソリューションを提供します。