Cryogenic Mixed Refrigerant Systems
完璧な温度制御ソリューションについては、今すぐお問い合わせください。
What is the refrigeration principle of cryogenic mixed refrigerant systems?
Mixed refrigerant is a mixture composed of two or more pure refrigerants. According to its thermodynamic characteristics during phase change under constant pressure, there are three types: azeotropic mixed refrigerant, non-azeotropic mixed refrigerant and near-azeotropic mixed refrigerant. Among them, the first two are more commonly used, so what is the principle of mixing refrigerants?
In fact, whether it is a mixed refrigerant or a pure refrigerant, the principle is the same: under certain conditions, the refrigerant is compressed to a certain pressure, then throttled and expanded to produce the Joule-Thomson effect, and then refrigeration can be carried out. In layman’s terms, the refrigerant has a low boiling point at normal temperature and pressure. It can be used as a working medium to undergo physical changes of absorbing and releasing heat inside the refrigeration system, and achieves the refrigeration effect by absorbing heat.
Refrigerant can realize mutual conversion between gaseous and liquid states in the refrigeration system. The specific working process is: the compressor compresses the gaseous refrigerant sucked into the low-pressure end into high-temperature and high-pressure gaseous refrigerant, and discharges it through the high-pressure end to the condenser for heat dissipation, forming a liquid state. The refrigerant is then sent to the expansion throttle valve through the dry filter and enters the evaporator in a liquid state. It evaporates through the evaporator, turns into a gaseous state and absorbs a large amount of heat, and then enters the compressor. This repeated cycle produces a cooling effect.
The reason why mixed refrigerants are better than pure refrigerants is that pure refrigerants have limitations in variety and properties, while mixed refrigerants can modulate the properties of the refrigerant to expand the choice of refrigerants and have a higher degree of freedom.
Advantages and disadvantages of cryogenic mixed refrigerant systems
Mixed refrigerants circulate in the refrigeration system to achieve good refrigeration effects and are widely used in major refrigeration systems. As a new type of refrigeration fluid, mixed refrigerants have obvious advantages and disadvantages.
1. Advantages of mixed refrigerants
(1) The mixed refrigerant is a mixture, and its endothermic boiling process is a temperature change process, which makes the heat transfer temperature difference between the hot flow and the cold flow in the heat exchanger always low, so the refrigeration efficiency is high.
(2) Pure refrigerants have a limited scope of application, while mixed refrigerants can adapt the process to changes in production conditions by adjusting the components of the mixed refrigerants.
2. Disadvantages of mixed refrigerants
The main disadvantage of mixed refrigerants is that the mixed refrigerants need to be evenly distributed in the heat exchanger to achieve appropriate heat exchange. The conditions for use of mixed refrigerants are more complicated than those of pure refrigerants. However, in general, mixed refrigerants are still It is a major trend in the development of refrigerants.
Eメール info@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
精密冷凍機/小型冷凍機
(カスタムデザイン)
チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。
温度範囲 | -18°C ~ +30°C | +5°C ~ +35°Cシリーズ |
冷却能力 | 0.35 ~ 0.9kW | 1.8~50kW |
循環式チラー
(カスタムデザイン)
私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。
温度範囲 | -25°C ~ +30°Cシリーズ | -45°C ~ +30°Cシリーズ | -60°C ~ -20°Cシリーズ | -80°C ~ -20°Cシリーズ | -120°C ~ -70°Cシリーズ |
冷却能力 | 0.8 ~ 30kW | 0.75 ~ 12kW | 0.4 ~ 6kW | 0.2 ~ 6kW | 0.3 ~ 5kW |
低温チラー
(カスタムデザイン)
当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。
温度範囲 | -25°C ~ -5°Cシリーズ | -45°C ~ -10°Cシリーズ | -60°C ~ -10°Cシリーズ | -80°C ~ -30°Cシリーズ | -110°C ~ -50°Cシリーズ | -150℃〜-110℃シリーズ |
冷却能力 | 12~360kW | 6~180kW | 6~180kW | 4〜180kW | 2~120kW | 2.5 ~ 11kW |
(カスタムデザイン)
車両品質テスト用温度シミュレーション:バッテリー寿命テスト、燃料噴射装置/モーターテストベンチ、エアバッグテスト、コンポーネントテストベンチなど。
(カスタムデザイン)
電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。
バッテリーエネルギー貯蔵システム用液体冷却
(カスタムデザイン)
種類 | コンバーティング・ステーション用 | 蓄電池用 | 充電ステーション用 |
冷却能力 | 45kW | 5 ~ 8.5kW | 4kW |
ZLFQシリーズ
(カスタムデザイン)
クーラント分配ユニット
液冷装置は、半導体試験、電子機器恒温試験、サーバー支持インフラ冷却、その他の流体温度制御場所に適しています。
温度範囲 | +5°C ~ +35°C | +5°C ~ +35°C |
冷却能力 | 15~150kW | 200~500kW |
MDサーマルチャックシリーズ
(カスタムデザイン)
RFデバイスや高密度パワーデバイス(IGBTやMOSFET)のテストに使用され、実験用フラットパネル(プラズマ、生物学的製品、バッテリー)などの急速冷却にも使用できる。
温度範囲 | -75°C ~ +225°C |
温度精度 | ±0.1℃ |
スクリュー冷凍機 (カスタムデザイン)
低温スクリュー冷凍機と常温スクリュー冷凍機
温度範囲 | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | +5°C ~ +30°C | -25°C ~ +5°C | -25°C ~ +5°C |
冷却能力 | 107~1027kW(シングルコンプレッサー) | 299~2134kW(デュアルコンプレッサー) | 98~934kW(シングルコンプレッサー) | 272~1940kW(デュアルコンプレッサー) | 48~467kW(シングルコンプレッサー) | 51~497kW(シングルコンプレッサー) |