Air Cooled Chiller for Sale

完璧な温度制御ソリューションについては、今すぐお問い合わせください。

Introduction of air cooled chiller

Air cooled chiller is a type of water chiller. It cools normal temperature water to a certain temperature through the compressor of the chiller to strengthen the cooling of the mold or machine. It is used as a stand-alone machine. The heat dissipation device is a built-in fan. There are three main interconnected ones. System: refrigerant circulation system, water circulation system, electrical automatic control system.

Refrigerant circulation system: The liquid refrigerant in the evaporator absorbs heat from the water and begins to evaporate. Eventually, a certain temperature difference is formed between the refrigerant and the water. The liquid refrigerant also completely evaporates into a gaseous state, and is then sucked and compressed by the compressor. (pressure and temperature increase), the gaseous refrigerant absorbs heat through the condenser and condenses into a liquid. After being throttled by the expansion valve (or capillary tube), it becomes low-temperature and low-pressure refrigerant and enters the evaporator to complete the refrigerant cycle process.

Water circulation system: The water pump is responsible for pumping water from the water tank to the equipment that the user needs to cool. The chilled water takes away the heat and the temperature rises, and then returns to the chilled water tank.

Electrical automatic control system: including power supply part and automatic control part. The power supply part supplies power to compressors, fans, water pumps, etc. through contactors. The automatic control part includes thermostat, pressure protection, delayer, relay, overload protection, etc., which are combined to achieve automatic start-stop, protection and other functions based on the water temperature.

Features of air cooled chiller

The air cooled chiller uses air cooling, which eliminates the need for cooling towers, cooling water pumps and pipeline systems that are essential for cooling water systems. It avoids condenser scaling and water pipe blockage in areas with poor water quality. It also saves water resources and is the best cooling solution. Among cooling products, it is the most economical and simple model to maintain.

The air cooled chiller is noisier and larger than the water-cooled chiller and can only be installed outdoors. Water cooling units are mostly installed in basements.

Product features of air cooled chiller:

1. The compressor of the unit adopts a scroll-type fully sealed compressor and electronic control components, and is equipped with a condenser and evaporator made of high-quality copper tubes with high heat exchange efficiency;

2. Equipped with various safety protection devices, it has stable performance, low noise, long service life and simple operation; it adopts LCD display human-machine interface, which makes operation simple and convenient, and the operating status is clear at a glance;

3. The models adopt single compressor or multi-compressor combined refrigeration system. The compressors can automatically operate alternately according to load changes, balancing the operating hours of each compressor, thereby saving energy consumption and extending the service life of the chiller. Convenient for energy adjustment and more energy-saving under partial load;

4. The whole machine has a box-type casing structure, beautiful appearance and compact structure. The operation of the unit can be checked at any time; the unit can have its own water tank and circulating water pump according to the cooling capacity, without the need for cooling towers and cooling water pumps, making installation and maintenance simple and convenient.

The function of air cooled chiller

1. The chiller is used to cool the molds of plastic processing machinery. It can greatly improve the surface finish of plastic products, reduce the surface marks and internal stress of plastic products, prevent the products from shrinking or deforming, facilitate the demoulding of plastic products, and accelerate product finalization. This greatly improves the production efficiency of the plastic molding machine.

2. Chillers are used in CNC machine tools, coordinate boring machines, grinders, machining centers, combined machine tools and various types of precision machine tool spindle lubrication and hydraulic system transmission medium cooling. They can accurately control the oil temperature, effectively reduce the thermal deformation of machine tools, and improve The machining accuracy of machine tools.

Eメール info@lneya.com    WeChat ID： +8615251628237    WhatsApp： +86 17851209193

精密冷凍機/小型冷凍機

(カスタムデザイン)

チラーは様々な産業や研究所で広く使用することができ、カスタマイズされた設計をサポートしています。

循環式チラー

(カスタムデザイン)

私達の再循環のスリラーは低温冷凍の技術を採用し、温度は- 120℃と低く、さまざまな付属品はカスタマイズ可能です。

低温チラー

(カスタムデザイン)

当社は、-150℃の温度制御範囲を持つ低温冷凍機の生産を専門としており、さまざまな業界の冷凍ニーズを満たすことができます。

Chillers for Automotive Test

(カスタムデザイン)

車両品質テスト用温度シミュレーション：バッテリー寿命テスト、燃料噴射装置/モーターテストベンチ、エアバッグテスト、コンポーネントテストベンチなど。

Chillers for Semiconductor

(カスタムデザイン)

電子部品の精密な温度制御に適しています。過酷な環境に対応する半導体電子部品の製造では、ICパッケージの組み立てやエンジニアリング、製造テストの段階で、電子温度テストやその他の環境テストシミュレーションが行われます。

バッテリーエネルギー貯蔵システム用液体冷却

(カスタムデザイン)

ZLFQシリーズ

(カスタムデザイン)

クーラント分配ユニット

液冷装置は、半導体試験、電子機器恒温試験、サーバー支持インフラ冷却、その他の流体温度制御場所に適しています。

MDサーマルチャックシリーズ

(カスタムデザイン)

RFデバイスや高密度パワーデバイス（IGBTやMOSFET）のテストに使用され、実験用フラットパネル（プラズマ、生物学的製品、バッテリー）などの急速冷却にも使用できる。

スクリュー冷凍機 (カスタムデザイン)

低温スクリュー冷凍機と常温スクリュー冷凍機