How to Install a Chiller?

How to Install a Chiller?

1. The place where the chiller is installed must be the floor, the installation pad or the foundation, and its levelness is within 6.4mm, and it can bear the operating weight of the chiller;

2. Before installation, check whether the machine parts are damaged or the screws are loose, and choose a place with good environmental sanitation and good ventilation for installation;

3. The device is installed in the machine room where the room temperature does not exceed 44°C. There should be sufficient space around and above the unit for daily maintenance of the chiller;

4.装置が最大出力で運転されている場合、適切な口径の水道管、冷却システム、冷水システムを選択し、正しく接続してください。

6.どのような負荷条件下でも、水流は安定していなければならない。

6. The planning and installation of all chilled water and cooling water pipelines should be carried out in accordance with conventional methods. Vibration damping pipes should be installed during piping to ensure proper elasticity, and to prevent the water in the evaporator from being drained when the water pump is shut down;

5.騒音と振動を減らすためには、パイプラインに防振装置を設置するのがよい。

8. Analyze water quality to prevent fouling from affecting heat transfer;

9. Please install a filter at the inlet of the water pipe and clean it regularly;

10. After the leak test is over, it is necessary to carry out anti-rust treatment for all connecting ports.