200 Ton Air Cooled Chiller

200 Ton Air Cooled Chiller

When using the 200 ton air cooled chiller, in order to reduce failures and accidents of this type of mechanical equipment and avoid affecting the progress of the experiment, the daily maintenance of this type of equipment is very necessary.

1. The maintenance of 200 ton air cooled chiller is to check, adjust and deal with the technical status of the equipment frequently. It is to maintain and protect the 200 ton air cooled chiller by general methods such as wiping, cleaning, lubricating and adjusting. The performance and technical status of the chiller;

2. In order to ensure that the operators carry out daily maintenance, it is stipulated that the operators are required to perform equipment maintenance within a certain period of time before the end of each shift and before holidays;

3. For the 200 ton air cooled chiller that cannot be shut down for maintenance in continuous operation, it is necessary to use all available time to wipe, inspect, and maintain to complete the functions specified in the maintenance rules and meet the requirements;

4. Regular inspection of the protective devices and pipelines on the 200 ton air cooled chiller is required to ensure the reliability of the circulating sealed pipeline and that there are no loose parts;

5. The equipment should not be overloaded and run without disease. It is not allowed to leave the post when the equipment is running. If a fault is found, the operation should be stopped immediately and the maintenance personnel should be notified in time;

6. Do not change the speed or load and unload workpieces during the operation of the 200 ton air cooled chiller; the inside and outside of the equipment are clean, free of grease and rust, and do daily and regular maintenance;

7. Understand the refrigeration technology of 200 ton air cooled chiller, choose the parameter adjustment reasonably, and use the equipment correctly;

The regular maintenance of the 200 ton air cooled chiller can maintain and improve the performance accuracy of the equipment, prolong the service life of the equipment, reduce maintenance costs, and improve the production capacity and economic benefits of the enterprise.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.