Under what environment should industrial chiller units be installed

Under what environment should industrial chiller units be installed

1. LC -25°C ~ -5°C 저온 냉각기 shall be kept away from fire sources and inflammables. If it is installed together with boiler and other heating elements, full attention shall be paid to the influence of thermal radiation.

2. Choose a well-ventilated place with room temperature below 45 ℃. It is not allowed to install and store outdoors or in the environment with corrosive gas.

3. Places with less dust shall be selected.

4. The site shall be well lit for maintenance and inspection.

5. To meet the needs of maintenance, repair and cleaning of evaporator and condenser heat exchange tubes. There must be enough pipe extraction space at either end of the unit, and the length direction should be equal to the length of the evaporator and condenser of the unit.

6. In order to facilitate the lifting and maintenance of the machine, the space required for the installation, operation and maintenance of the unit shall be reserved.

7. Complete drainage shall be realized around the industrial water chiller and the whole machine room.

High security installation environment

Choose a safe installation environment, mainly because the water chiller will produce high temperature heat during use and operation. Therefore, we must keep away from some flammable and explosive substances when selecting the installation, which can not only improve the cooling efficiency of the industrial water chiller, but also improve its service life.

Installation environment with good ventilation and low temperature

The industrial water chiller will generate heat emission during its operation, so we should choose to install it in a well-ventilated and low temperature environment, which is conducive to ventilation and heat dissipation. Working in a good environment can improve the working efficiency of the overall unit and improve the production rate.

A well-lit environment

The later maintenance of the industrial water chiller is essential, so it is necessary to select the staff who are convenient for maintenance in the light environment to carry out the inspection, maintenance and maintenance.