Thermal Fluid Heater – LNEYA

Thermal Fluid Heater means that the heat transfer oil medium reaches the required temperature after the power supply is turned on. After the temperature control of the heating equipment is carried out, the heat of the heat transfer oil is taken away by the heating equipment, and the temperature of the heat transfer oil drops, but the temperature at this time remains However, it is much higher than the normal temperature heat transfer oil, so there is no need to heat the new heat transfer oil again, only need to recycle the used heat transfer oil, and connect the heat transfer oil pipeline from the heat transfer oil outlet of the equipment to the oil heater inlet , the heat transfer oil can be recycled and reused, which reduces the electricity cost of the enterprise and saves energy.

Thermal Fluid Heater has the following advantages:

1. The device occupies a small area and can be directly installed and placed in the production workshop. It is pollution-free, quick to start, and simple and flexible to operate;

2. Higher working temperature can be obtained under lower operating pressure, up to 300°C, which reduces the pressure level of heat-consuming equipment and helps reduce equipment investment costs;

3. Closed cycle heating and cooling, small heat loss, significant energy saving effect, and can meet multiple heating equipment with different operating temperatures and multiple cooling equipment with different cooling capacity;

4. The heat transfer effect is good, the heating oil and the cooling oil are forced to circulate by the pump, which is beneficial to heat transfer, and the temperature difference between the material and the oil bath is small during the heating process;

5. The temperature control is accurate, and the temperature can be controlled within ±0.5°C.

UC +50°C ~ +170°C

UC +50°C ~ +300°C