Liquid Immersion Cooling Solution For Data Center

완벽한 온도 제어 솔루션을 위해 지금 바로 문의하세요.

As the power of single cabinets in data centers becomes larger and larger, the use of traditional air cooling technology for heat dissipation can no longer meet the fast and efficient cooling requirements of data centers. Under the guidance of the “dual carbon” strategic goal, it has become an inevitable choice to develop low-carbon and efficient cooling technology to solve the technical problems of current data center heat dissipation difficulties and realize the green and low-carbon development of data centers.

Research shows that liquid cooling technology has become an effective solution to solve the cooling problem of data centers. Liquid cooling methods are mainly divided into three types: cold plate liquid cooling, immersion liquid cooling and spray liquid cooling. Compared with traditional air cooling technology, liquid cooling technology has the advantages of efficient cooling, energy saving and consumption reduction, quietness and low noise, system stability, and space saving.

Cold plate liquid cooling is a liquid cooling method in which the heat of the heating device is indirectly transferred to the coolant enclosed in the circulation pipeline through a cold plate (usually made of copper or aluminum), and the heat is taken away by the coolant. Since the coolant is not in direct contact with the electronic equipment, the coolant can be directly made of non-dielectric liquids with high specific heat capacity such as water or ethylene glycol aqueous solution, which has the advantage of strong heat-carrying capacity and can remove more heat from the electronic equipment.

Immersion liquid cooling uses coolant as the heat transfer medium, completely immersing the heating device in the coolant, and performing heat exchange through direct contact. Depending on whether the coolant undergoes phase change, immersion liquid cooling is divided into single-phase immersion liquid cooling and dual-phase immersion liquid cooling.

Compared with dual-phase liquid cooling, single-phase thermal fluid does not undergo phase change, nor does it evaporate in the air like dual-phase thermal fluid, and the cost is an order of magnitude lower. Because single-phase thermal fluid does not evaporate in the air, the cooling system does not have to be sealed to ensure evaporated fluid is recaptured, which also makes it easier to uninstall or replace server components, improving system serviceability. At the same time, single-phase liquid cooling has low requirements on the external environment and can be started from small-scale deployments such as some servers in the data center or edge data centers. It can increase the rack availability rate and make the server operation safer and more stable. Its outstanding energy efficiency can also help reduce the size of data center infrastructure and even eliminate the need for other infrastructure, thereby significantly reducing energy consumption requirements, so it is gradually recognized by the industry.

이메일: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

정밀 냉각기 / 소형 냉각기

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

재순환 냉각기

(맞춤형 디자인)

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

저온 냉각기

(맞춤형 디자인)

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

자동차 테스트용 냉각기

(맞춤형 디자인)

차량 품질 테스트를 위한 온도 시뮬레이션: 배터리 수명 테스트, 연료 인젝터/모터 테스트 벤치, 에어백 테스트, 부품 테스트 벤치 등

반도체용 냉각기

(맞춤형 디자인)

전자 부품의 정밀한 온도 제어에 적합합니다. 열악한 환경을 위한 반도체 전자 부품 제조에서 IC 패키징 조립 및 엔지니어링 및 생산 테스트 단계에는 전자 열 테스트 및 기타 환경 테스트 시뮬레이션이 포함됩니다.

배터리 에너지 저장 시스템용 액체 냉각

(맞춤형 디자인)

ZLFQ 시리즈

(맞춤형 디자인)

냉각수 분배 장치

액체 냉각 장비는 반도체 테스트, 전자 장비 항온 테스트, 서버 지원 인프라 냉각 및 기타 유체 온도 제어 장소에 적합합니다.

MD 써멀 척 시리즈

(맞춤형 디자인)

RF 디바이스 및 고밀도 전력 디바이스(IGBT 및 MOSFET) 테스트에 사용되며 실험실 평판(플라즈마, 생물학적 제품, 배터리) 등의 급속 냉각에도 사용할 수 있습니다.

스크류 칠러 (맞춤형 디자인)

저온 스크류 냉각기 및 실온 스크류 냉각기