Water Chiller for Cooling the Mixing Tank

완벽한 온도 제어 솔루션을 위해 지금 바로 문의하세요.

Chiller for cooling the mixing tank is one of the chiller models. It cools normal temperature water to a certain temperature through the compressor of the chiller to strengthen the cooling of the mold or machine. It is used as a stand-alone machine. The heat dissipation device is a built-in fan. There are three main Interconnected systems: refrigerant circulation system, water circulation system, electrical automatic control system.

The chiller is a kind of water cooling equipment that can provide constant temperature, constant flow and constant pressure cooling water equipment. Its working principle is to first inject a certain amount of water into the water tank inside the machine, cool the water through the refrigeration system, and then send the low-temperature cooling water to the equipment that needs to be cooled by the water pump. After the chilled water takes away the heat, the temperature rises and then flows back to the water tank. , to achieve cooling effect. The cooling water temperature can be automatically adjusted according to requirements, which can save water for long-term use.

The basic composition of chiller for cooling the mixing tank:

콘덴서: 냉동 과정에서 콘덴서는 열 에너지를 출력하고 냉매를 응축하는 역할을 합니다. 냉동 컴프레서에서 배출된 고압 과열 증기가 콘덴서로 들어가면 증발기와 냉동 컴프레서에서 흡수된 열과 배관 내에서 흡수된 열을 포함하여 작업 과정에서 흡수된 모든 열을 주변 매체(물 또는 공기)로 전달하여 빼앗아갑니다. 냉매의 고압 과열 증기는 다시 액체로 응축됩니다. (냉각 매체와 냉각 방식에 따라 콘덴서는 수냉식 콘덴서, 공냉식 콘덴서, 증발식 콘덴서의 세 가지 범주로 나눌 수 있습니다.)

Liquid receiver: The liquid receiver is installed after the condenser and is directly connected to the drain pipe of the condenser. The refrigerant liquid of the condenser should flow into the liquid receiver unobstructed, so that the cooling area of the condenser can be fully utilized. On the other hand, when the heat load of the evaporator changes, the demand for refrigerant liquid also changes. At that time, the liquid receiver plays the role of adjusting and storing refrigerant. For small chiller refrigeration equipment systems, liquid receivers are often not installed, but condensers are used to adjust and store refrigerant.

Drying filter: In the refrigeration cycle of the chiller, moisture and dirt (oil, iron filings, copper filings) must be prevented from entering. The main source of moisture is the trace moisture contained in the newly added refrigerant and lubricating oil, or due to Moisture brought by air entering during system maintenance. If the water in the system is not completely removed, when the refrigerant passes through the throttle valve (thermal expansion valve or capillary tube), the water will sometimes solidify into ice due to the drop in pressure and temperature, blocking the passage and affecting the normal operation of the refrigeration device. Therefore, a filter drier must be installed in the chiller refrigeration system.

Evaporator: The evaporator is a heat exchange device that relies on the evaporation of refrigerant liquid to absorb the heat of the cooled medium. Its function in a refrigeration system is to absorb heat. In order for the evaporation process to proceed stably and lastingly, the evaporated gas must be continuously pumped away by a refrigeration compressor to maintain a certain evaporation pressure.

5. 열팽창 밸브: 열팽창 밸브는 냉동 시스템의 유량 조절 밸브일 뿐만 아니라 냉동 장비의 스로틀 밸브이기도 합니다. 냉동 장비의 건식 필터와 증발기 사이에 설치되며 온도 감지 백은 증발기 출구에 싸여 있습니다. 주요 기능은 고압 및 상온 냉매 액체가 열팽창 밸브를 통과 할 때 압력을 낮추어 증발기로 저온 및 저압 냉매 습증기 (대부분 액체, 작은 부분 증기)로 전환하여 기화하여 열을 흡수하여 냉각 목적을 달성하는 것입니다.

이메일: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

냉각 냉각기                                                                                                     

재순환 냉각기/냉장 서큘레이터

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

수냉식 냉각기 / 소형 냉각기

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

저온 냉각기

(맞춤형 디자인)

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

냉각 및 난방 냉각기                                                                            

냉각 및 난방 냉각기

(맞춤형 디자인)

온도 제어 범위: -120°C ~ +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

재순환 히터 냉각기

(맞춤형 디자인)

온도 제어 범위: -45°C ~ +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.