Air Cooled Chiller – Chiller Supplier

Air Cooled Chiller – Chiller Supplier

The air cooled chiller can be used on small systems, and most of the large equipment are water-cooled. As far as the main engine is concerned, the initial investment of water-cooled chillers is a little less than that of air-cooled chillers. But with cooling towers and computer rooms\electronic water treatment equipment, etc., it is much higher than air cooled chillers. In terms of long-term operation, the cooling efficiency of the water-cooled chiller will decrease relatively, but the air cooled chiller will not.

The air cooled chiller adopts the air cooling method, which saves the cooling tower, cooling water pump and pipeline system that are necessary for the cooling water system, avoids scaling of the condenser and blockage of water pipes in areas with poor water quality, and saves water resources. Among air-conditioning equipment products, maintenance is economical and simple.

The one-time investment of air cooled chiller is slightly higher than that of water-cooled chiller, but the annual operating cost is lower than that of water-cooled chiller. Half the cost of the boiler.

The noise and volume of the air cooled chiller are larger than that of the water-cooled chiller, so it can only be installed outdoors. Water-cooled chillers are mostly installed in basements.

Product features of air cooled chiller:

1. The compressor adopts a scroll type hermetic compressor and electric control components, and is equipped with a condenser and an evaporator made of effective copper tubes for heat exchange;

2. The air cooled chiller is equipped with various safety protection devices, with stable performance, low noise, long service life, and easy operation; it adopts a liquid crystal display human-machine interface, which is simple and convenient to operate, and the operating status is clear at a glance;

3. Adopt single compressor or multi-compressor combined refrigeration system. The compressors can automatically run alternately according to load changes, balancing the running hours of each compressor, achieving the effect of saving energy and extending the service life of the chiller. Facilitate energy regulation, more energy saving at partial load;

4. The box structure of the whole machine has a beautiful appearance and a compact structure, and the operation of the air cooled chiller can be checked at any time; the equipment can be equipped with a water tank and a circulating water pump according to the cooling capacity, without a cooling tower and a cooling water pump, and the installation and maintenance are simple convenient.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.