Chiller 50 kw – Water Chiller Industrial

Chiller 50 kw – Water Chiller Industrial

During the long-term continuous operation of any equipment, some large and small faults will inevitably occur, and the 50 kw chiller is no exception. If we cannot solve these faults in time, it will affect the production of the enterprise, delay the construction period, and cause losses.

Fault 1: Blockage occurs

There is a filter in the 50 kw chiller to filter out impurities in the system. When the blockage in the system is serious, the cooling capacity will drop, and if it is serious, there may be frosting and other phenomena. In this case, the filter is usually blocked. At this time, the filter should be removed in time and replaced. filter of the same type.

Fault 2: Compressor high pressure alarm

When the compressor has a high-pressure alarm, some friends will be nervous, thinking that there is a major failure. In fact, this is usually because the ambient temperature is too high and the dust in the chassis is serious, which leads to a high-voltage alarm. High pressure alarm is actually a relatively simple and common problem. We clean up the surrounding environment of the chiller and open the windows for ventilation. The working environment of the chiller should not exceed 40°C. If the temperature is too high, an alarm will occur.

Fault 3: Check the parts and clean them

Clean the dust from the dust filter, heat dissipation aluminum foil and fan in the condenser. Check the evaporator for scale debris and remove them, check the condition of the lubricating oil, and replace the lubricating oil regularly, check whether there are loose or worn parts, and deal with them in time.

Surface cleaning is also very important for 50 kw chiller, long-term use will also cause a lot of dust and dirt, we should also keep the surface of 50 kw chiller clean.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.