Compressed Air Chiller

Compressed Air Chiller

The condenser of the compressed air chiller is blown by a fan to dissipate heat. There are five main reasons for high-voltage failures:

1. The condenser of the compressed air chiller is blocked: if the condenser is blocked, it will cause abnormal condensation of high-pressure refrigerant gas in the refrigerant system, causing a large amount of gas to coalesce, resulting in high-voltage failure.

Solution: Clean and remove dirt from the condenser. Please consult the manufacturer for specific methods.

2. Too much refrigerant in the compressed air chiller: Too much refrigerant cannot be condensed into a liquid state, occupying too much area of the condensing pipe, reducing the condensation effect, and increasing the pressure.

Solution: Slowly release some refrigerant on the low pressure side.

3. The opening of the expansion valve of the compressed air chiller is too small: the expansion valve is used to throttle the high-pressure liquid refrigerant into a gaseous state. If the opening is too small, the pressure of the front condenser will be too high.

Solution: Properly increase the opening of the expansion valve.

4. There is air in the compressed air chiller system: This kind of reason often occurs after new equipment or compressor maintenance, and air is mixed into the refrigeration system, so that the air cannot be condensed and remains in the condenser, causing the pressure to rise.

Solution: bleed air through the air separation valve, exhaust port or condenser of the chiller, and consult the chiller manufacturer.

5. Abnormal operation of the condenser fan: This will lead to poor heat dissipation of the condenser, that is, the heat generated inside the refrigeration refrigerant cycle cannot be removed by the fan fan, and then the temperature and pressure will rise, and a high pressure alarm will appear.

Solution: Check and repair the fan, remove the dust and sundries around the fan cover, and clean it with compressed air or water gun after shutdown.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.