Heating and Cooling Chillers

완벽한 온도 제어 솔루션을 위해 지금 바로 문의하세요.

Heating and cooling chillers are a new type of temperature control product that integrates multiple functions such as cooling, heating and constant temperature. Compared with single-function products such as traditional air conditioners, it can better save energy and reduce environmental pollution.

The principle of heating and cooling chillers

Heating and cooling chillers use a refrigeration cycle system, which uses a compressor, evaporator, condenser, throttling device and control system. In cooling mode, the heat of the equipment or space is discharged through the condenser and cold air is blown out at the same time, thus achieving the effect of Cooling effect. In the heating mode, a combination of compressor, evaporator, condenser, expansion valve, heater, etc. is used to absorb the heat of the equipment or environment through the indoor unit, and then compress it into high-temperature and high-pressure gas. After dissipating heat through the evaporator, Then the hot gas is released through the heat exchanger to achieve high temperature.

This kind of circulation system generally uses heat pump technology. Heat pumps use the natural temperature differences of air, water, underground water, etc. to absorb heat from low-temperature environmental media, compress and increase the temperature, and release the high-temperature heat to the room or equipment that needs to be heated. Heat pumps can be said to be a new energy-saving heating method because they use natural energy and require very little electricity. Only a small part of the electric energy is needed to drive the compressor to complete the entire cycle process. Therefore, heating and cooling chillers are highly efficient and Energy saving, environmental protection and other characteristics.

Functions of heating and cooling chillers

1. Refrigeration function: When the equipment or room is in a high-temperature environment, the equipment or outdoor air can be sucked in through the condenser, compressed by the compressor, and turned into a high-temperature and high-pressure gas, which is then diffused through the expansion valve, and the heat is then exchanged through the evaporator. discharge the device to the outdoors.

2. Heating function: Diffuse high-temperature equipment or indoor air to the evaporator of the outdoor unit through the expansion valve, so that the heat absorbs outdoor heat through the evaporator to form high-temperature and high-pressure gas, which can then release heat energy through the heat exchanger.

3. Hot water supply function: During the use of heating and cooling chillers, waste heat and other energy sources can also be used to provide users with hot water supply through accessories such as gas water heaters and solar water heaters.

4. Dehumidification and purification function: In severely humid and humid environments, the effect of dehumidifiers is more obvious. Not only can it quickly dehumidify, it can also purify indoor air through the high-efficiency filter equipped with the indoor unit, removing bacteria, viruses, ozone, dust and other harmful substances.

Advantages of heating and cooling chillers

1.Double effect

As a new type of product with both heating and cooling functions, heating and cooling chillers have dual functions. They are not only easy to use, but also have great advantages in economic benefits.

2. High efficiency, energy saving, environmental protection and health

Heating and cooling chillers are one of the most efficient temperature control methods in the world. They use the natural temperature difference of the air to not only greatly reduce the production of pollutants in the air, but also to significantly reduce indoor temperature and indoor humidity.

3. Various types

The appearance styles of heating and cooling chillers are rich and diverse, which not only can meet the needs of various industrial designs, but also are suitable for different manufacturers’ structures. Its compact design is very suitable for the needs of most manufacturers.

4. Low cost of use

Heating and cooling chillers have the advantages of high efficiency, energy saving and environmental protection, and their use cost is much lower than other single temperature control equipment.

In summary, heating and cooling chillers not only have dual functions, but also have the advantages of easy installation, energy saving, environmental protection, and low cost of use.

완벽한 온도 제어 시스템 설계 및 제조를 제공합니다. 표준 모델부터 완벽한 맞춤형 제품까지 900 . 당사는 고객 서비스를 전문으로 하며 각 고객이 특정 요구에 맞는 최적의 온도 제어 시스템을 갖출 수 있도록 최선을 다하고 있습니다.

비표준 맞춤형 솔루션을 제공합니다. 단일 냉각 냉각기와 냉각 및 난방 콤보 장치를 모두 사용할 수 있습니다.

이메일: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

냉난방 시스템(SUNDI 시리즈)

(사용자 지정 디자인)

온도 제어 범위: -120°C ~ +350°C

다양한 산업 분야에서 널리 사용되는 냉난방 온도 조절기입니다.

냉각 및 난방 시스템(WTD 시리즈)

(사용자 지정 디자인)

(마이크로 채널/튜브 리액터 전문)

온도 제어 범위: -70°C ~ +300°C

마이크로 채널에 특화된 설계(작은 액체 보유 용량, 강력한 열 교환 용량, 순환 시스템 고압 강하)

냉각 및 난방 서큘레이터

(사용자 지정 디자인)

온도 제어 범위: -45°C ~ +250°C

난방 서큘레이터

(사용자 지정 디자인)

온도 제어 범위: +50°C ~ +300°C

참고: UC 시리즈는 열전달 매체의 온도를 제어할 수 있습니다. UST 시리즈는 열 전달 매체의 온도를 제어할 수 있을 뿐만 아니라 반응 물질의 온도도 제어할 수 있습니다.

TES 시리즈

(사용자 지정 디자인)

온도 제어 범위: -85°C ~ +250°C

LTS 시리즈(불소화 액체) 

(사용자 지정 디자인)

온도 제어 범위: -80°C ~ +80°C

TCU 멀티 리액터 온도 제어 시스템

(사용자 지정 디자인)

온도 제어 범위: -120°C ~ +250°C

냉각 냉각기                                                                                                     

재순환 냉각기/냉장 서큘레이터

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

수냉식 냉각기 / 소형 냉각기

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

저온 냉각기

(맞춤형 디자인)

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

고온 냉각기

(맞춤형 디자인)

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.