How to Install a Chiller?

How to Install a Chiller?

1. The place where the chiller is installed must be the floor, the installation pad or the foundation, and its levelness is within 6.4mm, and it can bear the operating weight of the chiller;

2. Before installation, check whether the machine parts are damaged or the screws are loose, and choose a place with good environmental sanitation and good ventilation for installation;

3. The device is installed in the machine room where the room temperature does not exceed 44°C. There should be sufficient space around and above the unit for daily maintenance of the chiller;

4. 장비가 최대 전력으로 작동 중일 때 적절한 직경의 수도관, 냉각 시스템 및 냉수 시스템을 선택하고 올바르게 연결하세요.

6. 어떤 부하 조건에서도 물의 흐름은 안정적으로 유지되어야 합니다.

6. The planning and installation of all chilled water and cooling water pipelines should be carried out in accordance with conventional methods. Vibration damping pipes should be installed during piping to ensure proper elasticity, and to prevent the water in the evaporator from being drained when the water pump is shut down;

5. 소음과 진동을 줄이려면 파이프라인에 진동 차단기를 설치하는 것이 좋습니다.

8. Analyze water quality to prevent fouling from affecting heat transfer;

9. Please install a filter at the inlet of the water pipe and clean it regularly;

10. After the leak test is over, it is necessary to carry out anti-rust treatment for all connecting ports.