Jacketed Glass Reactor Heating and Cooling Systems
Dynamic temperature control of jacketed glass reactors is a key step in the chemical reaction process, which directly affects the reaction rate, product quality and energy efficiency. Dynamic temperature control usually requires a precise and responsive control system to adjust in time according to the temperature changes during the reaction process to maintain the required reaction conditions. Here are a few key points:
Temperature Control Unit (TCU):
The TCU should have high-precision temperature control capabilities and be able to respond quickly to temperature changes to adapt to temperature fluctuations that may occur during the reaction process. Dynamic response speed is an important consideration in selecting a TCU because temperature changes during the reaction process can be very rapid.
Medium Circulation System:
The temperature inside the reactor is controlled by circulating a heating or cooling medium (such as water, oil or salt bath) in the jacket. • The temperature, flow rate and pressure of the circulating medium need to be precisely controlled to ensure the stability and accuracy of temperature control.
Sensors and Monitoring:
Temperature sensors are placed inside the reactor and in the jacket to monitor temperature changes in real time.
The data acquisition system is used to collect temperature data and feed it back to the control system for real-time adjustments.
Control strategy:
PID (proportional-integral-derivative) controller is a commonly used control algorithm that adjusts the control signal according to the deviation between the set point and the actual measurement value.
More advanced control strategies, such as fuzzy logic control or model predictive control, can also be used for more complex reaction process control.
Safety measures:
Over-temperature protection and emergency shutdown mechanisms are designed to prevent safety accidents caused by temperature runaway.
Operation interface:
User-friendly operation interface allows operators to set parameters, monitor status and adjust control strategies.
Maintenance and calibration: Regularly check and calibrate temperature sensors and control systems to ensure long-term accuracy and reliability.
The above factors should be fully considered when selecting and designing the dynamic temperature control system of the jacketed glass reactor to meet the temperature control needs of specific chemical reactions. In addition, with the advancement of technology, some new control systems and methods are also developing, such as more intelligent and automated systems, which can further improve control accuracy and efficiency.
We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.
비표준 맞춤형 솔루션을 제공합니다. 단일 냉각 냉각기와 냉각 및 난방 콤보 장치를 모두 사용할 수 있습니다.
이메일: lilia@lneya.com WeChat ID: +8615251628237 WhatsApp: +86 17851209193
1.Cooling and Heating Systems
- 온도 범위: -120℃ ~ +350℃
- 고정밀, 지능형 온도 제어
- 냉각 용량: 0.5kW ~ 1200kW
- 열 유체의 수명을 연장하는 완전 밀폐형 시스템
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
온도 범위 | -10 ~ +150°C 시리즈 | -25 ~ +200°C 시리즈 | -25 ~ +300°C 시리즈 | -45 ~ +250°C 시리즈 | -45 ~ +300°C 시리즈 | -60 ~ +250°C 시리즈 | -60 ~ +300°C 시리즈 | -70 ~ +250°C 시리즈 | -80 ~ +250°C 시리즈 | -90 ~ +250°C 시리즈 | -100 ~ +100°C 시리즈 | ||
냉각 용량 | 1.5 ~ 15kW | 1~200kW | 1~200kW | 0.45 ~ 200kW | 0.9 ~ 25kW | 0.25 ~ 60kW | 0.75 ~ 25kW | 0.4 ~ 15kW | 0.3 ~ 80kW | 0.2 ~ 80kW | 0.45 ~ 80kW | ||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
- 온도 범위: -45℃ ~ +250℃
- 에머슨 코플랜드 컴프레서, 신뢰할 수 있는 품질
- 자가 진단 기능, 다중 안전 보호 장치
- 열 유체의 수명을 연장하는 완전 밀폐형 시스템
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
온도 범위 | -25°C ~ +200°C 시리즈 | -45°C ~ +250°C 시리즈 | |||||||
냉각 용량 | 1 ~ 15kW | 0.25 ~ 15kW | |||||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
- (마이크로 채널/튜브 리액터 전문)
- 온도 범위: -70℃ ~ +300℃
- 고성능 순환 펌프, 보다 안정적인 온도 제어 효과
- 더 많은 산업의 요구를 충족하는 넓은 온도 범위
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
온도 범위 | -70°C ~ +300°C | -45°C ~ +250°C | -70°C ~ +200°C | ||||||
냉각 용량 | 1.1 ~ 7.5kW | 1.5 ~ 5.5kW | 11 ~ 50kW | ||||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
- 온도 범위: -120℃ ~ +250℃
- 밀폐된 반복 가능한 온도 제어
- 내장형 전기 난방 열유 보조 시스템
- 필요에 따라 냉기 및 열원 열교환 모듈 추가
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
온도 범위 | -45°C ~ +250°C 시리즈 | -120°C ~ +250°C 시리즈 | 맞춤형 온도 제어 시스템 | RT+10°C ~ +135°C | |||||
난방 용량 | 25 ~ 80kW | 25 ~ 80kW | 사용자 지정 | 25 ~ 300kW | |||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
2.Cooling Chillers
Low Temperature/Cryogenic Chillers (Water Cooled)
- 온도 범위: -150℃ ~ -5℃
- 국제 브랜드 컴프레서, 높은 냉각 효율
- 2차 과냉각 기술, 빠른 냉각 속도
- 자동화된 제어 및 운영, 효율적이고 에너지 절약형
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
Six product series
온도 범위 | -25°C ~ -5°C | -45°C ~ -10°C | -60°C ~ -10°C | -80°C ~ -30°C | -110°C ~ -50°C | -150°C ~ -110°C | |||
냉각 용량 | 12kW…360kW | 6kW…180kW | 6kW…180kW | 4kW…180kW | 2kW…120kW | 2.5kW…11kW | |||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
Recirculating Chiller/Refrigerated Circulator (Air Cooled)
- 온도 범위: -120℃ ~ +30℃
- 세계적인 브랜드 컴프레서, 캐스케이드 냉동 기술
- 에틸렌글리콜 또는 에틸렌글리콜과 물의 혼합물을 사용합니다.
- 매체의 순도를 보장하는 완전 밀폐형 디자인
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
Five product series
온도 범위 | -25°C ~ +30°C | -45°C ~ +30°C | -60°C ~ -20°C | -80°C ~ -20°C | -120°C ~ -70°C | ||||
냉각 용량 | 0.8kW…30kW | 0.75kW…12kW | 0.4kW…6kW | 0.2kW…6kW | 0.3kW…5kW | ||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
Small Chillers / Mini Chillers
- 온도 범위: -18℃ ~ +35℃
- 세계적인 브랜드 압축기, 안정적인 성능
- 마이크로컴퓨터 컨트롤러, 조정 장치 0.1℃
- 에너지 절약, 높은 온도 제어 정확도
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
Two product series
온도 범위 | -18°C ~ +30°C | +5°C ~ +35°C | |||||||
냉각 용량 | 0.35 ~ 0.9kW | 1.8kW…50kW | |||||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |
고온 냉각기
- 온도 범위: -100℃ ~ +80℃
- 국제 브랜드 컴프레서 및 기타 액세서리
- 매체의 순도를 보장하는 완전 밀폐형 디자인
- PLC 프로그래밍 가능 컨트롤러
- 각 장치는 12시간 이상 부하 테스트를 거칩니다.
Five product series
온도 범위 | +5°C ~ +40°C | -25°C ~ +40°C | -45°C ~ +40°C | -80°C ~ +80°C | -100°C ~ +80°C | ||||
냉각 용량 | 6kW…40kW | 2kW…15kW | 1kW…8kW | 0.kW…3kW | 1.5kW…3kW | ||||
참고: -150℃ ~ +350℃의 모든 온도 범위와 모든 냉각 용량을 맞춤 설정할 수 있습니다. |