KRY 및 테스트 챔버

The liquid refrigerant in the evaporator of the unit is exchanged with the circulating air inside the box, and the temp. rises, from the liquid state to the gaseous state, and is inhaled by the suction port of the compressor.After the compressor compresses the high temperature and high pressure refrigerant gas through the oil separator, the refrigerant oil carried during the compression process is separated clean, then entered into the condenser, and heat is exchanged with the ambient air or cooling water. Change from high temp.and high pressure gas to high pressure normal temp. liquid.The refrigerant liquid at high pressure and normal temp. is changed from high pressure liquid to low pressure liquid through dry filter and then throttled down by expansion valve. Low pressure liquid enters unit evaporator, The circulating air brings the cooling amount to the inside of the box to achieve refrigeration.

80L 압력 용기에서는 부동액을 용기에 주입하고 전체 폐쇄 순환 시스템을 채택하여 부동액과 외부 세계 사이의 공기 접촉 가능성을 피하고 수증기의 응축을 방지합니다. 팽창 박스가 질소로 보호되면 끓는점이 높아져 열전도 액체의 온도 범위도 넓어지며, 또한 환경의 산소와의 접촉으로 인한 산화를 방지하여 열전도 액체의 수명을 연장합니다.

The touch interface optimizes the availability of the device. Multi-level users can be implemented through password protection. The specified operator has limited permissions and can only accept settings. This avoids accidental modification and mis-operation of parameters. The operation is continuously monitored. Warnings and failures are clearly displayed and the system automatically shuts down if necessary. Faults can be tracked, so testing does not need to be restarted. At this point, an existing record is invoked.The system has a variety of data and communication channels that can be adjusted according to specific requirements. The temperature control unit can also be remotely controlled via the network or included in a control system Unification.

고객 사례