Low Temperature Cooler

Low Temperature Cooler

In the process of using the low temperature cooler, especially in the hot summer, many customers and friends have reported that the cooling speed of the chiller has slowed down. What causes the cooling speed to slow down?

Reasons for the slow cooling speed of low temperature cooler:

1. The ventilation effect of the placement position is not good

The location of the low temperature cooler The side air inlet and the upper air outlet should be free of obstacles to ensure that the air inlet and outlet are ventilated and spacious.

2. The indoor temperature is too high

If the ambient temperature is too high, it will affect the heat dissipation of the low temperature cooler and reduce the cooling efficiency of the chiller. Therefore, in the process of using the air-cooled low temperature cooler, please pay attention to the ambient temperature to avoid affecting the unit.

3. Wrong type selection/insufficient cooling capacity

When the type of low temperature cooler is inconsistent, the cooling capacity of the chiller will not keep up with the heat generated by the equipment, and the temperature control of the equipment will not be effective.

4. Compressor efficiency is poor

Under the long-term operation of the low temperature cooler, the inner parts will also be worn, the gap will increase, and the seal will not be tight, resulting in a decrease in the air delivery capacity of the compressor and a decrease in cooling capacity. If the compressor fails, it must be repaired or replaced in time.

5. Impurities

If there are impurities/dirt in the system of the low temperature cooler, it will cause blockage, reduce the cooling effect, and even affect the entire unit.

6. The low temperature cooler is not regularly maintained

To improve the efficiency of the water-cooled low temperature cooler, it is obvious that regular maintenance is required, which not only improves the stable operation efficiency of the unit, but also increases the production capacity.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.