Low Temperature Glycol Chiller

Low Temperature Glycol Chiller

Regular maintenance must be done after purchasing low temperature glycol chiller, which can prolong the life of low temperature glycol chiller, reduce equipment failure, avoid production impact, and reduce company maintenance costs. So how should low temperature glycol chiller be maintained?

1. If the low temperature glycol chiller has an alarm fault, you can press the alarm button first, and then troubleshoot one by one. Note: Do not start the low temperature glycol chiller forcibly before troubleshooting. If you start it forcibly, it will cause unnecessary trouble and may damage the whole unit.

2. Regularly clean the condenser, evaporator, and heat dissipation pipes. I suggest that you clean them every six months to ensure that the low temperature glycol chiller will not fail.

3. After purchasing a low temperature glycol chiller and using it for a period of time, check whether the refrigeration oil and lubricating oil are contaminated. If so, please replace it immediately to ensure that the compressor can operate normally, thereby increasing work efficiency.

4. The water-cooled low temperature glycol chiller needs to clean the cooling tower and the impurities in the water tank, because there are various impurities in the tap water, and dirt will accumulate after long-term use.

5. Air-cooled low temperature glycol chiller should pay attention to, after starting up, first check whether the direction of the fan is correct. If the fan is reversed, it may be that the power cord is reversed. At this time, just turn off the chiller, adjust the direction of the fan and start it again. OK.

6. Before installing the low temperature glycol chiller, you must choose a good location and place it in a place where the surrounding air circulates, so as to ensure that the low temperature glycol chiller has a good heat dissipation environment and avoid high temperature alarms.

7. Check whether the filter is normal, or if it is clogged, it must be replaced in time to ensure the normal operation of the low temperature glycol chiller.

비즈니스를 위한 맞춤형 솔루션

저온 냉각기(수냉식 및 공냉식)

온도 제어 범위: -150°C ~ -5°C

당사는 -150°C의 낮은 온도 제어 범위를 갖춘 저온 냉각기 생산을 전문으로 하며, 다양한 산업의 냉장 요구 사항을 충족할 수 있습니다.

재순환 냉각기 (수냉식 및 공냉식)

온도 제어 범위: -120°C ~ +30°C

당사의 재순환 냉각기는 저온 냉동 기술을 채택하고 온도가 -120℃까지 낮으며 다양한 액세서리를 사용자 정의 할 수 있습니다.

실온 냉각기/소형 냉각기

온도 제어 범위: +5°C ~ +50°C

이 냉각기는 다양한 산업 및 실험실에서 널리 사용될 수 있으며 맞춤형 설계를 지원합니다.

직접 냉각식 냉동 장비

온도 제어 범위: -120°C ~ -10°C

열 교환 면적이 작고 열 교환이 큰 장소에 적합합니다.

직접 냉각식 초저온 냉각기

온도 제어 범위: -150°C ~ -110°C

비즈니스를 위한 맞춤형 솔루션.

스크류 칠러

저온 스크류 냉각기 및 실온 스크류 냉각기

비즈니스를 위한 맞춤형 솔루션.