Detailed Description

The System Process Flow Is As Follows:

The liquid refrigerant in the evaporator of the unit is exchanged with the circulating air in the interior of the tank. The temperature rises from liquid to gas, and is sucked into the suction port of the compressor. The high-temperature and high-pressure refrigerant gas after compression by the compressor passes through The oil separator separates the refrigerating machine oil carried in the compression process, and then enters the condenser, and exchanges heat with ambient air or cooling water to change from high temperature and high pressure gas to high pressure normal temperature liquid. The high-pressure normal temperature refrigerant liquid is dried by a filter and then throttled and depressurized by an expansion valve, that is, from a high-pressure liquid to a low-pressure liquid. The low-pressure liquid (lower boiling point) enters the evaporator of the unit, and the cooling air is brought to the inside of the tank through the circulating air to achieve refrigeration.

Product features and advantages：

The anti-freeze solution is injected into the 80L pressure vessel, and the fully closed circulation system is adopted. This avoids the opportunity for the antifreeze to contact with the outside air and ensures the condensation of the water. After the expansion tank is protected by nitrogen, the temperature range of the heat transfer liquid is also broadened because its boiling point is increased. In addition, oxidation of the thermally conductive liquid in contact with oxygen in the environment is also avoided, thereby extending the useful life of the thermally conductive liquid.

Product parameters (All products can be customized)

Model		KRYP-38W
Temp Range		-40℃～135℃
Tank volume		200L
heating power		38kW
Refrigerating Output	135℃	38kW
	20℃	38kW
	0℃	38kW
	-20℃	26kW
	-35℃	10kW
Temperature Control Accuracy		±0.3℃
System pressure display		Pressure of Refrigeration system is realized by pressure gauge (High pressure, low pressure);
		The circulation system pressure is displayed on the touch screen by pressure sensor detection.
Controler		Siemens PLC and Fuzzy-PID Control Algorithm
Communicating Protocol		Ethernet Interface TCP/IP Protocol
Internal Temp Feedback		Equipment tank internal temperature, refrigeration system condensation temperature, compressor suction temperature, cooling water temperature (water cooling equipment is configured)。
Heat		The maximum heating output power of the system (according to each model);
		The heater has triple protection and independent temperature limiter to ensure the safety of heating system;
		Heating power 10kW adopts regulator, heating power output control adopts 4~20mA linear control.
Refrigerating Capacity		Refers to the ability to take away heat at different temperatures (ideal condition), the actual working conditions need to consider environmental heat dissipation, please enlarge properly, and do a good job of insulation measures.
High temperature cooling module		It is possible to cool the module from a high temperature of 150℃
Circulating pump flow max		Adopt crown submagnetic drive pump / German brand magnetic drive pump
		200L/MIN 2.5BAR
Source 380V50HZ		58kW max
Shape Size (Air-cooled)
Shape Size (Water cooled)		100015001850
Compression Engine		Emerson Valley Wheel / Turin, Italy
Evaporimeter		Adopting DANFOSS Plate Heat Exchanger / High strength Plate Heat Exchanger
Refrigeration Accessory		Emerson / Danfoss brand dry filter, pressure control, oil separator, etc.
Expansion Valve		Danfoss thermostatic expansion valve/ Emerson electronic expansion valve
Operation Panel		7-inch color touch screen, and the temperature curve shows the export of EXCEL data
Safe Guarding		With self-diagnosis function; phase sequence phase breaker, freezer overload protection; high-voltage pressure switch, overload relay, thermal protection device and other safety protection functions.
Cryogen		R-404A/R507C
Electronic pump interface		DN80 PN10 RF
Water-cooled type W		Type W is water cooled
Water-cooled Condenser		Double-pipe (heat) exchanger
Cooling Water 32℃		17m³/H
Shell material		Cold rolled sheet spray (Standard Colour 7035)
Temperature spread		-40℃～150℃

LNEYA attends various exhibitions at home and abroad every year. At the exhibition, we show the latest research equipment of LNEYA. Every year, long-term cooperative customers will come to exhibitions and communicate with us. We are also actively developing new customers to provide them with high quality machines and services.

After sale service

Quality assurance

Guarantee that the goods are sold to be conform to the provisions of the contract and qualified new products by factory inspection, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract.

Installation and debugging

After the arrival of the goods, my company or my company agent is responsible for installation and debugging of equipment need on-site installation and debugging.

Inspection and acceptance

After installation and debugging, acceptance by the customer to confirm the goods to be conform to the provisions of the contract and qualified new products, quality performance, technical indicators and configured are in accordance with manufactures and technical documents stipulated in the contract, and after the confirmation of a full set of technical documents, sign the installation acceptance report and confirm acceptance.

Training

At the same time of installation and debugging of equipment, my company’s after-sales service engineer is responsible for technical training for user until user can be skilled of operation. In the process of using equipment by customer, customer can consult relevant technical issues to after-sales service personal of our company at any time, according to the situation, my company will arrange training on site or remote.