Liquid Immersion Cooling Solution For Data Center

Contacte-nos hoje para obter a solução perfeita de controlo da temperatura

As the power of single cabinets in data centers becomes larger and larger, the use of traditional air cooling technology for heat dissipation can no longer meet the fast and efficient cooling requirements of data centers. Under the guidance of the “dual carbon” strategic goal, it has become an inevitable choice to develop low-carbon and efficient cooling technology to solve the technical problems of current data center heat dissipation difficulties and realize the green and low-carbon development of data centers.

Research shows that liquid cooling technology has become an effective solution to solve the cooling problem of data centers. Liquid cooling methods are mainly divided into three types: cold plate liquid cooling, immersion liquid cooling and spray liquid cooling. Compared with traditional air cooling technology, liquid cooling technology has the advantages of efficient cooling, energy saving and consumption reduction, quietness and low noise, system stability, and space saving.

Cold plate liquid cooling is a liquid cooling method in which the heat of the heating device is indirectly transferred to the coolant enclosed in the circulation pipeline through a cold plate (usually made of copper or aluminum), and the heat is taken away by the coolant. Since the coolant is not in direct contact with the electronic equipment, the coolant can be directly made of non-dielectric liquids with high specific heat capacity such as water or ethylene glycol aqueous solution, which has the advantage of strong heat-carrying capacity and can remove more heat from the electronic equipment.

Immersion liquid cooling uses coolant as the heat transfer medium, completely immersing the heating device in the coolant, and performing heat exchange through direct contact. Depending on whether the coolant undergoes phase change, immersion liquid cooling is divided into single-phase immersion liquid cooling and dual-phase immersion liquid cooling.

Compared with dual-phase liquid cooling, single-phase thermal fluid does not undergo phase change, nor does it evaporate in the air like dual-phase thermal fluid, and the cost is an order of magnitude lower. Because single-phase thermal fluid does not evaporate in the air, the cooling system does not have to be sealed to ensure evaporated fluid is recaptured, which also makes it easier to uninstall or replace server components, improving system serviceability. At the same time, single-phase liquid cooling has low requirements on the external environment and can be started from small-scale deployments such as some servers in the data center or edge data centers. It can increase the rack availability rate and make the server operation safer and more stable. Its outstanding energy efficiency can also help reduce the size of data center infrastructure and even eliminate the need for other infrastructure, thereby significantly reducing energy consumption requirements, so it is gradually recognized by the industry.

Correio eletrónico: info@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Chillers de precisão / Chillers pequenos

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Chillers de recirculação

(Desenhos personalizados)

Nosso resfriador de recirculação adota tecnologia de refrigeração de baixa temperatura, a temperatura é tão baixa quanto -120 ℃ e vários acessórios são personalizáveis.

Refrigeradores de baixa temperatura

(Desenhos personalizados)

Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.

Chillers for Automotive Test

(Desenhos personalizados)

Simulação da temperatura para o ensaio da qualidade do veículo: ensaio da duração da bateria, banco de ensaio do injetor/motor de combustível, ensaio do airbag, banco de ensaio de componentes, etc.

Chillers for Semiconductor

(Desenhos personalizados)

Adequado para o controlo preciso da temperatura de componentes electrónicos. No fabrico de componentes electrónicos de semicondutores para ambientes agressivos, as fases de montagem de embalagens IC e de ensaios de engenharia e produção incluem ensaios térmicos electrónicos e outras simulações de ensaios ambientais.

Resfriamento líquido para sistemas de armazenamento de energia de baterias

(Desenhos personalizados)

Série ZLFQ

(Desenhos personalizados)

Unidade de distribuição do líquido de refrigeração

O equipamento de arrefecimento líquido é adequado para testes de semicondutores, testes de temperatura constante de equipamento eletrónico, infra-estruturas de apoio a servidores de arrefecimento e outros locais de controlo de temperatura de fluidos.

Série de mandris térmicos MD

(Desenhos personalizados)

É utilizado para testar dispositivos RF e dispositivos de potência de alta densidade (IGBTs e MOSFETs), podendo também ser utilizado para o arrefecimento rápido de painéis planos de laboratório (plasma, produtos biológicos, baterias), etc.

Resfriadores de parafuso (Desenhos personalizados)

Refrigeradores de parafuso a baixa temperatura e refrigeradores de parafuso a temperatura ambiente