Circulating Cooling Water System

Contacte-nos hoje para obter a solução perfeita de controlo da temperatura

The circulating cooling water system is configured for water cooling of production equipment. A cooling water system that uses water as the cooling medium and circulates it. After the cold water flows through the production equipment that needs to be cooled (often called heat exchange equipment, such as heat exchangers, condensers, and reactors), the temperature rises. If it is discharged immediately, the cold water is only used once (called a once-through cooling water system). When the heated cold water flows through the cooling equipment, the water temperature will drop back, and it can be pumped back to the production equipment for reuse. The consumption of cold water is greatly reduced, and more than 95% can often be saved. Cooling water accounts for about 70% of industrial water consumption. Therefore, the circulating cooling water system plays a role in saving a large amount of industrial water.

Cooling equipment can be divided into open and closed types, so circulating cooling water systems are also divided into open and closed types.

Open systems are more complex to design and operate. There are two types of open cooling equipment: cooling pools and cooling towers, both of which mainly rely on the evaporation of water to reduce water temperature. Furthermore, cooling towers often use fans to promote evaporation, and the cooling water is often blown away. Therefore, the open circulating cooling water system must be supplied with fresh water. Due to evaporation, the circulating water is concentrated, and the concentration process will promote salt scaling. Supplementary water has a dilution effect, and its flow rate is often determined based on the concentration limit of circulating water. Usually the amount of supplementary water exceeds the amount of water lost by evaporation and wind blowing, so some circulating water (sewage) must be discharged to maintain the balance of water volume.

In an open system, due to the contact between water flow and the atmosphere, dust, microorganisms, etc. enter the circulating water; in addition, the escape of carbon dioxide and the leakage of materials in the heat exchange equipment also change the quality of the circulating water. For this reason, circulating cooling water often needs to be treated, including sediment control, corrosion control and microbial control. The determination of the treatment method is often related to the quantity and quality of the make-up water, as well as the performance of the production equipment. When using multiple agents, possible chemical reactions between agents should be avoided.

Closed circulating cooling water system uses closed cooling equipment, and the circulating water flows in the tube and usually uses wind to dissipate heat outside the tube. Except for material leakage from heat exchange equipment, there are no other factors that change the quality of circulating water. To prevent salt scaling in heat exchange equipment, cooling water sometimes needs to be softened. In order to prevent heat exchange equipment from being corroded, corrosion inhibitors are often added: Pay attention to safety when using high-concentration, highly toxic corrosion inhibitors, and the cooling water discharged during maintenance should be properly disposed of.

Correio eletrónico: info@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Chillers de precisão / Chillers pequenos

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Chillers de recirculação

(Desenhos personalizados)

Nosso resfriador de recirculação adota tecnologia de refrigeração de baixa temperatura, a temperatura é tão baixa quanto -120 ℃ e vários acessórios são personalizáveis.

Refrigeradores de baixa temperatura

(Desenhos personalizados)

Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.

Chillers for Automotive Test

(Desenhos personalizados)

Simulação da temperatura para o ensaio da qualidade do veículo: ensaio da duração da bateria, banco de ensaio do injetor/motor de combustível, ensaio do airbag, banco de ensaio de componentes, etc.

Chillers for Semiconductor

(Desenhos personalizados)

Adequado para o controlo preciso da temperatura de componentes electrónicos. No fabrico de componentes electrónicos de semicondutores para ambientes agressivos, as fases de montagem de embalagens IC e de ensaios de engenharia e produção incluem ensaios térmicos electrónicos e outras simulações de ensaios ambientais.

Resfriamento líquido para sistemas de armazenamento de energia de baterias

(Desenhos personalizados)

Série ZLFQ

(Desenhos personalizados)

Unidade de distribuição do líquido de refrigeração

O equipamento de arrefecimento líquido é adequado para testes de semicondutores, testes de temperatura constante de equipamento eletrónico, infra-estruturas de apoio a servidores de arrefecimento e outros locais de controlo de temperatura de fluidos.

Série de mandris térmicos MD

(Desenhos personalizados)

É utilizado para testar dispositivos RF e dispositivos de potência de alta densidade (IGBTs e MOSFETs), podendo também ser utilizado para o arrefecimento rápido de painéis planos de laboratório (plasma, produtos biológicos, baterias), etc.

Resfriadores de parafuso (Desenhos personalizados)

Refrigeradores de parafuso a baixa temperatura e refrigeradores de parafuso a temperatura ambiente