Water Glycol Cooling System

Contacte-nos hoje para obter a solução perfeita de controlo da temperatura

A water glycol cooling system is an industrial refrigeration system that uses an antifreeze called ethylene glycol mixed with water to lower the freezing point of the refrigeration system in the application.

Ethylene glycol is a class of organic compounds belonging to the alcohol family. When mixed with water and pumped through the pipes of a cooling system, ethylene glycol slows down freezing. It helps maintain temperature consistency across applications. Some glycol products can also inhibit corrosion and bacterial growth within cooling system piping.

Comparison of Two Ethylene Glycols

There are two varieties of ethylene glycol that should never be mixed together: ethylene glycol and propylene glycol. Both types offer the same relative frost protection rating. Both also help prevent corrosion. Certain grades of both types of glycol can also help prevent the growth of algae and bacteria inside the cooler.

Ethylene glycol

Ethylene glycol is a moderately toxic chemical that has a sweet taste and may be harmful if swallowed. Therefore, it should not be used in drinking water or food processing systems where leakage is possible. Ethylene glycol is more widely used due to its lower purchase price. Industrial applications such as skating rinks and factories that require large amounts of coolant find this to be the most economical option for ethylene glycol.

Propylene glycol

Propylene glycol is less toxic and is considered a food-grade antifreeze. This type of glycol is safer than ethylene and easier to handle. Propylene glycol is commonly used in the food industry or in industrial refrigeration systems where people may come into contact with liquids. Propylene glycol may also be more viscous than ethylene, slightly affecting heat exchange rates even when used at very low temperatures. It is important to note that you should never mix different types or brands of glycols as this can cause condensation of the product and clogging of filters in the refrigeration system, which can cause heat transfer and fluid flow problems.

Mixing water with ethylene glycol in industrial refrigeration systems

Ethylene glycol must be mixed with water to function properly. The type and amount of water to be used are key factors to consider.

Water type

Each glycol chiller has its own set of manufacturer recommendations for the best type of water to use with the system. Although tap water is initially acceptable, long-term use of deionized water is rarely recommended as it may adversely affect certain metals in the cooler. Sometimes manufacturers require coolers to use distilled or reverse osmosis water. The key is to check with the manufacturer about your refrigeration system’s specific needs.

The ratio of water to ethylene glycol

Calculating the appropriate ratio of glycol to water in a cooling system depends on the coldest temperature the glycol solution will reach during operation. If the cooling system is used indoors where there is no chance of freezing, the amount of glycol required will be significantly less than that required for a glycol chiller where outdoor temperatures tend to drop below freezing. Additionally, if the application requires very low temperatures to operate, a glycol mixture similar to that used in outdoor systems should be used. In cooling systems, this temperature is typically the saturated suction temperature in the evaporator, and this temperature is typically 10°F below the cooler set point temperature. It is important to use the proper ratio of glycol and water in your cooling system.

Fornecemos a conceção e o fabrico de sistemas completos de controlo de temperatura. Desde modelos standard a produtos personalizados completos até 900 . Somos especializados no serviço ao cliente e dedicamo-nos a ajudar cada cliente a ter o sistema de controlo de temperatura ideal para as suas necessidades específicas.

Fornecemos soluções personalizadas não padronizadas. Estão disponíveis chillers de refrigeração simples e unidades combinadas de refrigeração e aquecimento.

Correio eletrónico: info@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Chillers de arrefecimento                                                                                                     

Chillers de recirculação / Circulador refrigerado

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Refrigeradores de água / Refrigeradores pequenos

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Refrigeradores de baixa temperatura

(Desenhos personalizados)

Somos especializados na produção de refrigeradores de baixa temperatura com uma gama de controlo de temperatura tão baixa como -150°C, que pode satisfazer as necessidades de refrigeração de diferentes indústrias.

Chillers de alta temperatura

(Desenhos personalizados)

O refrigerador pode ser amplamente utilizado em várias indústrias e laboratórios, e suporta um design personalizado.

Chillers de arrefecimento e aquecimento                                                                            

Chillers de arrefecimento e aquecimento

(Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +350°C

termóstato de arrefecimento e aquecimento, amplamente utilizado em várias indústrias.

Aquecedor de recirculação Chillers

(Desenhos personalizados)

Gama de controlo de temperatura: -45°C a +250°C