Laboratory Heater Chiller

2023/05/26 ClassificaçãoNotícias do sector 285

Laboratory Heater Chiller

Laboratory Heater Chiller provides users with a liquid environment with controlled heating and cooling, uniform and constant temperature when working. It is often used in reaction kettles to control the heat demand and exothermic process during the reaction process. It can accurately and linearly control the temperature of the materials in the kettle, and program control can be selected. Mode, the temperature difference of heat transfer medium and material can also be set, and it can also be used for heating and cooling of other equipment separately.

First, introduction of Laboratory Heater Chiller:

Laboratory Heater Chiller is mainly composed of compressor, condenser, filter, expansion valve, heat exchanger, evaporator, circulating pump, display screen, liquid level indicator, electrical cabinet, motor, etc., and the heat transfer medium is driven by the pump ( Usually water or oil) from the oil tank with built-in heater to the temperature control equipment, and from the temperature control equipment back to the oil tank. The controller adjusts the temperature of the thermal fluid to adjust the temperature of the temperature control device according to the temperature of the thermal fluid measured by the temperature sensor or the internal temperature of the temperature control device.

Second, precautions for use of Laboratory Heater Chiller:

1. Whether it is air-cooled or water-cooled, the temperature control device must be located in an operating environment with enough fresh air, and the space should be large enough.

2. The heat conduction medium pipeline cannot be blocked, and the heat conduction medium pipe should be checked and maintained regularly to avoid material strain and fission.

3. In order to avoid damage to the integrated cooling and heating pipelines, users are using high mineral content, so it is necessary to regularly use water treatment chemicals to clean the dirt on the pipelines.

4. When not in use, please be sure to disconnect the cooling water connection pipe, clean up the remaining cooling water/heat transfer oil in the pipe, pack it and store it in a dry place.

The Laboratory Heater Chiller adopts a fully enclosed pipeline design to reduce the demand for heat transfer fluid while improving the heat utilization rate of the system to achieve rapid temperature rise and fall. The heat transfer medium in the expansion vessel does not participate in circulation, which can reduce the risk of heat transfer medium absorbing moisture and volatilization during operation.

Sistemas dinâmicos de controlo de temperatura (personalização de suporte)

Sistemas de arrefecimento e aquecimento (série SUNDI) (Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Faixa de temperatura

Série -10 ~ +150°C

Série -25 ~ +200°C

Série -25 ~ +300°C

Série -45 ~ +250°C

Série -45 ~ +300°C

Série -60 ~ +250°C

Série -60 ~ +300°C

Série -70 ~ +250°C

Série -80 ~ +250°C

Série -90 ~ +250°C

Série -100 ~ +100°C

-25 ~ +200°C uma máquina para dois reactores

-40 ~ +200°C uma máquina para dois reactores

Capacidade de arrefecimento

1,5 ~ 15kW

1 ~ 200kW

0,45 ~ 200kW

0,9 ~ 25kW

0,25 ~ 60kW

0,75 ~ 25kW

0,4 ~ 15kW

0,3 ~ 80kW

0,2 ~ 80kW

0,45 ~ 80kW

até 10*2kW

Sistemas de arrefecimento e aquecimento (série WTD) (Desenhos personalizados)

（Reactores de canal micro / tubo especializados）

Gama de controlo de temperatura: -70°C a +300°C

Design especializado para micro canal (pequena capacidade de retenção de líquido, forte capacidade de troca de calor, sistema de circulação de alta queda de pressão)

Faixa de temperatura	-70°C ~ +300°C	-45°C ~ +250°C	-70°C ~ +200°C
Capacidade de arrefecimento	1,1 ~ 7,5kW	1,5 ~ 5,5kW	11 ~ 50kW

Cooling and Heating Systems (TES series) (Desenhos personalizados)

Temperature Control Range: -85°C ~ +250°C

Temp Control Accuracy: ± 0.3°C

Faixa de temperatura	Série -45°C ~ +250°C	Série -85°C ~ +200°C	Série -60°C ~ +200°C
Capacidade de arrefecimento	0,3 ~ 25kW	0,25 ~ 25kW	3 ~ 60kW

Cooling and Heating Machines (LTS series) (Desenhos personalizados)

Temperature Control Range: -80°C to +80°C

It is widely used in the semiconductor process to control the temperature of the reaction chamber, the hot sink plate and the non-flammable heat transfer medium.

Faixa de temperatura	Série -20°C ~ +80°C	Série -45°C ~ +80°C	Série -60°C ~ +80°C	Série -80°C ~ +80°C
Controlo do fluxo	7 ~ 45 L/min	7 ~ 45 L/min	7 ~ 45 L/min	7 ~ 45 L/min

Circuladores de arrefecimento e aquecimento (Desenhos personalizados)

Gama de controlo de temperatura: -45°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Faixa de temperatura	Série -25°C ~ +200°C	Série -45°C ~ +250°C
Capacidade de arrefecimento	1 ~ 15kW	0,25 ~ 15kW

Circuladores de aquecimento (Desenhos personalizados)

Gama de controlo de temperatura: +50°C a +300°C

Nota: A série UC pode controlar a temperatura do meio de transferência de calor. A série UST pode não só controlar a temperatura do meio de transferência de calor, mas também controlar a temperatura do material de reação.

Faixa de temperatura	+50°C ~ +170°C (série UC)	+50°C ~ +300°C (série UC)	+50°C ~ +300°C (série UST)
Capacidade de aquecimento	5,5 ~ 15kW	3,5 ~ 130kW	3,5 ~ 95kW

TCU Sistema de controlo da temperatura de multi-reactores (Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Faixa de temperatura	Série -45°C ~ +250°C	Série -120°C ~ +250°C	Sistema de controlo de temperatura personalizado	RT+10°C ~ +135°C
Capacidade de aquecimento	25 ~ 80kW	25 ~ 80kW	Personalizado	25 ~ 300kW