Laboratory High and Low Temperature Circulation Device for Jacketed Reactor

When the laboratory high and low temperature circulation device is used in a jacketed reactor, the key is to ensure that the device can accurately control the temperature range and adapt to the rapid temperature change and highly stable temperature environment required for the experiment.

The following are the main factors to consider when choosing a laboratory high and low temperature circulation device:

1. Temperature range: Confirm whether the minimum and maximum operating temperatures of the device meet your experimental requirements. Usually, such equipment needs to cover the range from low temperature (such as -80℃) to high temperature (such as 200℃).

2. Temperature control accuracy: Choose a device with a high-precision temperature control system (such as ±0.1℃), which is particularly important for rigorous chemical synthesis or material research.

3. Cycle rate and uniformity: A good cycle design can ensure that the temperature reaches the set value quickly and is evenly distributed in the jacket, reducing local overheating or overcooling.

4. Safety features: Including over-temperature protection, pressure control and alarm systems to ensure the safety of operators and equipment.

5. User interface and control: Friendly operation interface, support programming control, can preset temperature change programs according to the experimental process, and improve experimental efficiency.

6. Energy consumption and environmental protection: Consider the energy efficiency ratio of the device, choose energy-saving products to reduce operating costs, and pay attention to environmental standards, such as using environmentally friendly refrigerants.

If you can provide the specific model and volume of your laboratory jacketed reactor, as well as the specific requirements for temperature control in the experiment (such as temperature range, heating or cooling speed, etc.), I will be able to recommend a high and low temperature circulation device model that better meets your actual needs or provide customized suggestions.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

Fornecemos soluções personalizadas não padronizadas. Estão disponíveis chillers de refrigeração simples e unidades combinadas de refrigeração e aquecimento.

Correio eletrónico: lilia@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Sistemas de arrefecimento e aquecimento (série SUNDI)

(Desenhos personalizados)

• Faixa de temperatura: -120℃ ~ +350℃
• Controlo de temperatura inteligente e de alta precisão
• Capacidade de arrefecimento: 0,5kW ~ 1200kW
• Sistema totalmente fechado para prolongar a vida útil do fluido térmico
• Cada dispositivo é submetido a um teste de carga durante mais de 12 horas

Circuladores de arrefecimento e aquecimento

(Desenhos personalizados)

• Faixa de temperatura: -45℃ ~ +250℃
• Compressor Emerson Copeland, qualidade fiável
• Função de auto-diagnóstico, vários dispositivos de proteção de segurança
• Sistema totalmente fechado para prolongar a vida útil do fluido térmico
• Cada dispositivo é submetido a um teste de carga durante mais de 12 horas

Sistemas de arrefecimento e aquecimento (série WTD)

(Desenhos personalizados)

• （Reactores de canal micro / tubo especializados）
• Faixa de temperatura: -70℃ ~ +300℃
• Bomba de circulação de alto desempenho, efeito de controlo de temperatura mais estável
• Ampla gama de temperaturas para satisfazer as necessidades de mais indústrias
• Cada dispositivo é submetido a um teste de carga durante mais de 12 horas

TCU Sistema de controlo da temperatura de multi-reactores

(Desenhos personalizados)

• Faixa de temperatura: -120℃ ~ +250℃
• Controlo de temperatura selado e repetível
• Sistema auxiliar de aquecimento elétrico a óleo térmico incorporado
• Adicionar módulos de permuta de calor de fonte fria e quente de acordo com as necessidades
• Cada dispositivo é submetido a um teste de carga durante mais de 12 horas