Recirculating Chiller with Low Temperature of -80
Advantages of -80 degree recirculating chiller:
1. A variety of imported brand compressors are available: according to the size of the required cooling capacity and the actual operating temperature, the semi-hermetic reciprocating piston compressor is optimally configured from the perspective of saving investment.
2. High reliability: The semi-hermetic compressor is used as the main engine, which not only improves the efficiency of the compressor itself, but also avoids the leakage of the compressor when it is turned on, reduces the after-sales service costs such as refrigerant addition and shaft seal replacement, and improves It ensures the reliability of continuous operation of the product for many years and the convenience of operation.
3. Fully automatic control: Siemens industrial-grade PLC controller and LCD touch screen are used for fully automatic operation. It has functions such as automatic/manual control, parameter setting and calibration, data recording, fault alarm and recording, and cumulative running time recording. Automatic control, no special management is required.
4. Energy saving: large cooling capacity equipment adopts semi-hermetic screw compressor to operate with economizer, which improves operating efficiency. The micro-accurate adjustment.
5. Energy adjustment: On the basis of the energy adjustment of the compressor itself, it is equipped with a special hot gas bypass energy adjustment, which can realize the stepless energy adjustment of the equipment.
6. Convenient installation and debugging: Most of the equipment is assembled into a whole in the factory, and the factory is filled with refrigerant, and the load test is not less than 8 hours to ensure that the user can start the machine successfully on site at one time.
Product features of -80 degree recirculating chiller:
1. Using the secondary subcooling technology, the refrigeration is rapid and the refrigeration temperature is low.
2. Imported compressor is used, and Gaoli plate heat exchanger is used for evaporator, which is small in size and high in efficiency.
3. Adopt a full set of imported cold controls.
4. Using DNAFOSS electronic expansion valve, the control precision is high.
5. The whole machine is installed. The system has been tested in the factory. The user only needs to install the refrigerant pipeline and the cooling water pipeline to run.
Chillers de baixa temperatura (arrefecidos a água e a ar)
Gama de controlo de temperatura: -150°C a -5°C
Application: Various Reactors, Distillation or Extraction System, Laboratory, Research Institute, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Semiconductor Test, Aerospace, Biological and Other Industries.
Faixa de temperatura | Série -25°C ~ -5°C | Série -45°C ~ -10°C | Série -60°C ~ -10°C | Série -80°C ~ -30°C | Série -110°C ~ -50°C |
Capacidade de arrefecimento | até 360kW | até 360kW | até 360kW | até 270kW | até 180kW |
Circuladores refrigerados (Arrefecimento a água e ar)
Gama de controlo de temperatura: -120°C a +30°C
Application: Various Reactors, Distillation or Extraction System, Laboratory, Research Institute, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Semiconductor Test, Aerospace, Biological and Other Industries.
Faixa de temperatura | Série -25°C ~ +30°C | Série -45°C ~ +30°C | Série -60°C ~ -20°C | Série -80°C ~ -20°C | Série -120°C ~ -70°C |
Capacidade de arrefecimento | até 38kW | até 12kW | até 7,2kW | até 7,2kW | até 8,6kW |
Refrigeradores de temperatura ambiente / Refrigeradores pequenos
Gama de controlo de temperatura: +5°C a +50°C
Application: Various Reactors, Distillation or Extraction System, Laboratory, Research Institute, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Semiconductor Test, Aerospace, Biological and Other Industries.
Faixa de temperatura | -18°C ~ +30°C | Série +5°C ~ +35°C |
Capacidade de arrefecimento | até 0,9kW | até 50kW |