Temperature Control in Bioreactor

Contacte-nos hoje para obter a solução perfeita de controlo da temperatura

The temperature control system in bioreactor is an instrument and equipment used in the chemical industry and pharmaceutical industry to connect reactors for dynamic temperature control of cooling and heating. So, in addition to temperature control in bioreactors, in what other ways can it be used?

Working principle of temperature control system in bioreactor

The working principle of the temperature control system in bioreactor is to drive the heat transfer medium (usually water, ethanol, silicone oil, etc.) from the oil tank equipped with a built-in heater to the temperature control device through a pump, and then from the temperature control device back to the oil tank. The controller adjusts the temperature of the hot fluid and thereby the temperature of the temperature control device based on the temperature of the hot fluid measured by the temperature sensor or the internal temperature of the temperature control device.

Typical applications of temperature control system in bioreactor:

Temperature control during the process;

Temperature control in small production processes;

Microchannel reactor temperature control;

Temperature control in reactor applications in chemical, pharmaceutical, and biotechnology fields;

Thermal test platform;

High and low temperature alternating material testing.

In the chemical industry, temperature control system in bioreactor is widely used. After the relevant users purchase the equipment, they need to carry out actual operation. However, many users do not know much about its main operations. If the operations are not performed as required, it will not only affect the performance and life of the equipment, but may even cause dangerous accidents. occur. This requires operators to have a basic understanding of the use of equipment when operating, so that they can operate the equipment better.

Correio eletrónico: info@lneya.com    ID WeChat: +8615251628237    WhatsApp: +86 17851209193

Sistemas de arrefecimento e aquecimento (série SUNDI)

(Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Sistemas de arrefecimento e aquecimento (série WTD)

(Desenhos personalizados)

（Reactores de canal micro / tubo especializados）

Gama de controlo de temperatura: -70°C a +300°C

Design especializado para micro canal (pequena capacidade de retenção de líquido, forte capacidade de troca de calor, sistema de circulação de alta queda de pressão)

Circuladores de arrefecimento e aquecimento

(Desenhos personalizados)

Gama de controlo de temperatura: -45°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Circuladores de aquecimento

(Desenhos personalizados)

Gama de controlo de temperatura: +50°C a +300°C

Nota: A série UC pode controlar a temperatura do meio de transferência de calor. A série UST pode não só controlar a temperatura do meio de transferência de calor, mas também controlar a temperatura do material de reação.

TCU Sistema de controlo da temperatura de multi-reactores

(Desenhos personalizados)

Gama de controlo de temperatura: -120°C a +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.