Reactor Thermal Control Units TCU

Reactor thermal control units TCU means that the customer has a fixed heat source, and the temperature from the original heat source is constant. If he wants to reuse it, this high-precision temperature control for other working conditions is called reactor thermal control units TCU, reactor thermal The control units TCU is based on a fixed heat source, which can effectively save energy and recover heat for reuse.

How can reactor thermal control units TCU achieve high-precision temperature control? First of all, what is the temperature of the heat source from the customer? How many degrees Celsius do we need to control the temperature twice to accurately control the temperature of the host equipment? The thermal oil secondary circulation temperature control system realizes flow regulation and control of the hot oil so that the heated objects Automatic temperature control according to buyer’s process requirements.

Reactor thermal control units TCU uses hot oil as the heat source, uses a proportional regulating valve to control the output of hot oil, and controls the temperature of the jacket or cavity flow channel of the host equipment to increase the temperature of the heated object to meet the process requirements of constant temperature heating. .

The working principle of reactor thermal control units TCU is to use the customer’s existing heat source to feed back to the control instrument through the system temperature detection point (the system hot oil outlet is used as the detection point for temperature control) to control the opening of the electric three-way proportional valve to control the heat. For oil flow, a high-temperature circulating pump is used to mix the hot oil evenly and deliver it to the customer’s host equipment. It is automatically exhausted through the exhaust valve of the oil and gas separator to stabilize the system pressure and ensure that the system’s hot oil is stable and exchanges heat with the buyer’s roller.

When the temperature of the hot oil approaches the set temperature value, the horizontal opening of the electric three-way proportional valve becomes smaller and smaller. In order to prevent the fluidity of the hot oil from decreasing, a high-temperature circulation pump is used to circulate the system internally to prevent the heat exchange efficiency and the temperature of the hot oil from being affected. The temperature is stable to ensure uniform heat exchange to meet customer heating process requirements. A reasonable temperature control system can effectively save energy.

We provide complete temperature control systems design and manufacturing. From standard models to complete customized products. We specialize in customer service and are dedicated to helping each customer have the optimal temperature control system for their specific need.

We provide non-standard customized solutions. Both single cooling chillers and cooling & heating combo units are available.

Email: lilia@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

• Temperature range: -120℃ ~ +350℃
• High-precision, intelligent temperature control
• Cooling capacity: 0.5kW ~ 1200kW
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Cooling and Heating Systems (WTD series)

(Custom Designs)

• （Micro channel / tube reactors specialized）
• Temperature range: -70℃ ~ +300℃
• High-performance circulation pump, more stable temperature control effect
• Wide temperature range to meet the needs of more industries
• Each device is load tested for more than 12 hours

Cooling and Heating Circulators

(Custom Designs)

• Temperature range: -45℃ ~ +250℃
• Emerson Copeland compressor, reliable quality
• Self-diagnosis function, multiple safety protection devices
• Fully closed system to extend the service life of thermal fluid
• Each device is load tested for more than 12 hours

Heating Circulators

(Custom Designs)

• Temperature range: +50℃ ~ +300℃
• Large heat exchange area and fast heating speed
• Self-diagnosis function, multiple safety protection devices
• Closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TES Series (Temperature control for fuel and oil testing)

(Custom Designs)

• Temperature range: -85℃ ~ +250℃
• Siemens PLC controller and other brand accessories
• Self-diagnosis function, multiple safety protection devices
• Fully closed circulation system, no oil mist at high temperatures
• Each device is load tested for more than 12 hours

TCU Multi-reactors Temperature Control System

(Custom Designs)

• Temperature range: -120℃ ~ +250℃
• Sealed, repeatable temperature control
• Built-in electric heating thermal oil auxiliary system
• Add cold and heat source heat exchange modules according to needs
• Each device is load tested for more than 12 hours

Cooling Chillers                                                                                                     

Recirculating Chillers / Refrigerated Circulator

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Mini Chillers / Small Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.

Low Temperature Chillers

(Custom Designs)

We specialize in the production of low-temperature chillers with a temperature control range as low as -150°C, which can meet the refrigeration needs of different industries.

High Temperature Chillers

(Custom Designs)

The chiller can be widely used in various industries and laboratories, and supports customized design.