Outdoor Water Cooled Chiller

Свяжитесь с нами сегодня, чтобы получить идеальное решение для контроля температуры

What is an outdoor water cooled chiller?

An outdoor water cooled chiller is one of those water chillers that removes heat from the water used in projects and industrial structures and puts the water back into the running cycle. In effect, a chiller moves heat from a space that requires temperature control to another space. Therefore, the chiller is not a means of generating cold, but a means of dissipating heat, whose task is to facilitate the transfer of unwanted and undesired heat caused by activity to places outside the system.

Cooling towers are specially designed for outdoor water cooled chillers. Because the condenser of a water-cooled chiller uses water as a stimulus and cooling material. The efficiency of a water-cooled chiller increases because wet surfaces are more successful at transferring heat and can do compression work at wetter temperatures.

How does outdoor water cooled chiller work?

Water-cooled chillers come into play during the evaporation process, the water and gas produced by the machine are taken to the evaporator and collect all the unwanted heat on the way and then return to the evaporator and store the obtained heat energy. After that, the refrigerant collects this heat and mobilizes it into the condensate, that is, the condenser sends all the collected heat to the cooling tower, and finally the hot air will pass through the cooling coil and dissipate the heat to the atmosphere.

The first stage:

The starting point of this cycle is where the water from the production process enters the evaporator and enters the cooling cycle.

During this part of the cycle, the heat absorbed by the refrigerant first appears in the form of a phase change from liquid to gas phase. As the refrigerant absorbs heat from the water, the temperature of the environment in contact with this part drops, so the water leaves at a lower temperature. This water enters the fan coil and carries the cool air to the desired space.

In fact, the evaporator is a place that, in addition to the current cycle, participates in another cycle, which is located between the evaporator and the water outlet of the cooling device. In fact, hot water enters the chiller evaporator, which cools it and then pumps it throughout the building to where it is needed.

second stage:

The gaseous refrigerant reaches the gas phase in the pre-liquid state and then enters the compressor. In the compressor, the gas condenses and the temperature and pressure increase so that it can enter the next high-pressure stage. The rise in pressure and temperature as it leaves the compressor is important because the refrigerant needs to release heat from inside the condenser, so it must carry enough heat to the condenser.

Another key function of the compressor is to draw refrigerant into the evaporator at the right time, keeping the pressure within the evaporator high enough to absorb the heat again.

The third phase:

The high-temperature gas enters the condenser, where the gaseous refrigerant is converted into a saturated, high-pressure liquid. This is a constant pressure process.

Since the condenser exists in another loop between the cooling towers, the water enters the cooling tower after the temperature rises. Because the main task of the cooling tower in a water-cooled chiller is to cool the consumed water, and the condenser uses this water as its driving material.

Where the excess heat of the water disappears and the water temperature returns to the desired low temperature. The heating process we mentioned earlier occurs in the condenser, releasing the gaseous refrigerant from the heat itself, which is the source of heat in question and needs to be eliminated by the cooling tower. In this way, the water entering the cooling tower from the condenser comes into contact with the air flow, transfers heat to the air, and then returns to the condenser.

The fourth stage:

The expansion valve is the last stage of the refrigerant and the refrigerant in the expansion valve undergoes these processes causing the refrigerant to become a mixture of liquid and gas and the same compounds re-enter the evaporator to resume the cycle.

Электронная почта: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Прецизионные охладители / Малые охладители

(Индивидуальные дизайны)

Чиллер может широко использоваться в различных отраслях промышленности и лабораториях, а также поддерживает индивидуальный дизайн.

Рециркуляционные чиллеры

(Индивидуальные дизайны)

Наш рециркуляционный охладитель использует низкотемпературную технологию охлаждения, температура составляет до -120℃, а различные аксессуары могут быть настроены.

Низкотемпературные чиллеры

(Индивидуальные дизайны)

Мы специализируемся на производстве низкотемпературных чиллеров с диапазоном регулирования температуры до -150°C, которые могут удовлетворить потребности в охлаждении различных отраслей промышленности.

Chillers for Automotive Test

(Индивидуальные дизайны)

Моделирование температуры для проверки качества автомобиля: проверка срока службы аккумулятора, стенд для проверки топливных форсунок/моторов, проверка подушек безопасности, стенд для проверки компонентов и т.д.

Chillers for Semiconductor

(Индивидуальные дизайны)

Подходит для точного температурного контроля электронных компонентов. При производстве полупроводниковых электронных компонентов для жестких условий эксплуатации этапы сборки, проектирования и производственного тестирования упаковки ИС включают в себя тепловые испытания электронных компонентов и другие симуляции испытаний на воздействие окружающей среды.

Жидкостное охлаждение для аккумуляторных систем хранения энергии

(Индивидуальные дизайны)

Серия ZLFQ

(Индивидуальные дизайны)

Блок распределения охлаждающей жидкости

Оборудование для жидкостного охлаждения подходит для тестирования полупроводников, электронного оборудования с постоянной температурой, охлаждения инфраструктуры поддержки серверов и других мест контроля температуры жидкости.

Серия термозажимных патронов MD

(Индивидуальные дизайны)

Он используется для тестирования радиочастотных устройств и силовых приборов высокой плотности (IGBT и MOSFET), а также может применяться для быстрого охлаждения лабораторных плоских панелей (плазма, биологические продукты, батареи) и т.д.

Шнековые чиллеры (Индивидуальные дизайны)

Низкотемпературные винтовые холодильники и винтовые холодильники комнатной температуры