Temperature Control in Bioreactor

Contact us today for the perfect temperature control solution

The temperature control system in bioreactor is an instrument and equipment used in the chemical industry and pharmaceutical industry to connect reactors for dynamic temperature control of cooling and heating. So, in addition to temperature control in bioreactors, in what other ways can it be used?

Working principle of temperature control system in bioreactor

The working principle of the temperature control system in bioreactor is to drive the heat transfer medium (usually water, ethanol, silicone oil, etc.) from the oil tank equipped with a built-in heater to the temperature control device through a pump, and then from the temperature control device back to the oil tank. The controller adjusts the temperature of the hot fluid and thereby the temperature of the temperature control device based on the temperature of the hot fluid measured by the temperature sensor or the internal temperature of the temperature control device.

Typical applications of temperature control system in bioreactor:

Temperature control during the process;

Temperature control in small production processes;

Microchannel reactor temperature control;

Temperature control in reactor applications in chemical, pharmaceutical, and biotechnology fields;

Thermal test platform;

High and low temperature alternating material testing.

In the chemical industry, temperature control system in bioreactor is widely used. After the relevant users purchase the equipment, they need to carry out actual operation. However, many users do not know much about its main operations. If the operations are not performed as required, it will not only affect the performance and life of the equipment, but may even cause dangerous accidents. occur. This requires operators to have a basic understanding of the use of equipment when operating, so that they can operate the equipment better.

Email: info@lneya.com    WeChat ID: +8615251628237    WhatsApp: +86 17851209193

Cooling and Heating Systems (SUNDI series)

(Custom Designs)

Temperature Control Range: -120°C to +350°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Automotive Industry, Semiconductor and Electrical Test, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Cooling and Heating Systems (WTD series)

(Custom Designs)

（Micro channel / tube reactors specialized）

Temperature Control Range: -70°C to +300°C

Specialized design for micro channel (small liquid holding capacity, strong heat exchange capacity, circulation system high pressure drop)

Cooling and Heating Circulators

(Custom Designs)

Temperature Control Range: -45°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.

Heating Circulators

(Custom Designs)

Temperature Control Range: +50°C to +300°C

Note: UC series can control the temperature of heat transfer medium. UST series can not only control the temperature of the heat transfer medium, but also control the temperature of the reaction material.

TCU Multi-reactors Temperature Control System

(Custom Designs)

Temperature Control Range: -120°C to +250°C

Application: Various Reactors (Microchannels, Glass, Jacketed Reactors, etc.), Distillation or Extraction System, Laboratory, University, Research Institute, Aerospace, Chemical, Pharmaceutical, Petrochemical, Biochemical, Medical, Hospital, R&D Workshop, Aerospace, Biological and Other Industries.