What is the specific function of 1 ton chiller?

What is the specific function of 1 ton chiller?

The LC -25°C ~ -5°C Low Temperature Chillers contains an insulated water tank and a water pump in its body, so it does not need to add another cooling tower to dissipate heat. It is very convenient to install and move. However, it has high requirements on the working environment.

First, because it is cooled by hot air circulation, if the ventilation effect of the installation workshop is not good, it will directly affect the cooling effect of the water chiller.

In addition, if you want to put the water chiller in a dust-free workshop with humidity requirements, Then I advise you to refit the water-cooled unit. Because the 1-ton water chiller will spray water vapor on the top of the unit to dissipate heat.

1、 Circuit system:

In order to prolong the service life of the machine, the more circuit protection, the better. More circuit protection also has a disadvantage, and the failure rate will increase.

Common protection circuits include phase protection, high voltage protection, low voltage protection, current overload protection, antifreeze protection, differential pressure protection, water flow protection, water level protection, temperature protection, compressor starting frequency protection, etc.

2、 Refrigeration system

The refrigeration system is the embodiment of the effect of the chiller. It is very correct to use the compressor with reliable quality and reasonably configure the major components.

Of course, it is not necessarily good to use the brand. It is configured according to the understanding of each manufacturer about the components.

The long service life of the refrigeration system mainly depends on the quality of the compressor, the shell of the condenser evaporator, the thickness of the pipe material, and the pressure resistance parameters.

3、 Pipeline system:

After the pipeline system is completed, the life of the ice chiller will generally be very long. For example, your pipeline is made of PVC, and the evaporator is made of 304.

The impurities are filtered, and the whole system will basically not rust. Your refrigeration system is also OK. Then I’m sure that your machine will have a long service life.

Even if there is a small fault and the contactor is replaced, it will not have a big problem, and the service life of the whole unit will certainly increase, According to our experience, under the consideration of cost, quality and stability.